Blog · October 13, 2026 · Tennessee
Blount County, Tennessee: GIS Map Guide
The free official GIS map for Blount County, how to search it, and what the parcel data does and doesn't tell you about owners, acreage and property lines.
Main page: Blount County, TN GIS & Parcel Viewer (official map link, Blount County facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Land questions in Blount County start in the same place: the official parcel map. Here's how to use the Blount County GIS map to find owners, acreage and boundary lines, and where it falls short.
Keep reading for the viewer link, how to search it, what the parcel data means, and how deeds and plats back it up in Blount County.
Getting oriented in Blount County
Alcoa, Friendsville, Rockford, and Townsend fill out the town list, and Maryville is where the county seat sits. The county's land area is about 559 square miles, and the Census Bureau estimated 141,456 residents there in 2023. Built-up areas around Rockford mean most clicks land on platted lots; larger undeveloped tracts are rarer and get attention fast. Parcels touching Fort Loudoun Lake tend to run long and narrow back from the water, a pattern you can see clearly on the Blount County map. The Great Smoky Mountains and Ridge-and-Valley Appalachians give parts of Blount County a parcel pattern shaped by slope rather than survey lines.
Where to open the official Blount County GIS map
Open the statewide Tennessee Property Viewer and zoom toward Townsend; Blount County's parcels are part of that layer. Select Blount County first; the viewer then searches that county's assessment roll by owner, address or parcel. Bookmark the Platbookmapper page for Blount County too; we update it when the official map moves.
Are the Blount County property lines accurate?
A Blount County GIS map is built for assessment, not construction. In Blount County, as in most places, the lines are a best fit of old deed calls onto modern aerial photos. Out toward Eagleton Village, boundaries follow bearings and old landmarks rather than a grid, and the parcel layer shows it. For a fence, an addition or a dispute in Blount County, budget for a licensed survey; it's the answer a court or a lender will accept.
Behind the map: land records in Blount County
For land near Friendsville, the parcel record is the index; the recorded deed is the source. Which office that is depends on how Tennessee organizes it, so look it up on the Blount County government site before you call. When the chain of title matters for land near Townsend, ask for the full deed history or hire a title company in Tennessee.
Who's clicking on Blount County parcels
Contractors quoting work near Eagleton Village check frontage and lot depth on the map before they drive out. House hunters looking at Alcoa use the parcel record as a free check on the listing: lot size, legal description and last recorded sale. Raw-land buyers scan Blount County imagery for empty tracts and check the owner records behind them. Rural owners near Eagleton Village use the map to see how many acres the county has on record for them and who owns the land next door.
Using the Blount County GIS map to find vacant land
A vacant-land search near Friendsville, step by step:
- Zoom out over the countryside around Alcoa with the aerial layer on, and look for parcels with no structures.
- A tax bill mailed far from Eagleton Village usually means an absentee owner, so note the mailing address on each record.
- Confirm legal access. In Blount County, as anywhere, a parcel with no road frontage depends on an easement.
- Pull up three or four similar parcels near Friendsville and compare their land values.
- For a tract near Friendsville, confirm zoning, septic suitability and flood status before you make an offer.
Before you buy near Alcoa, read how to tell if land is buildable.
Private and public hunting ground in Blount County
The woods between Friendsville and Eagleton Village can look like one block from the road, but the parcel layer often shows several owners. The Tennessee Wildlife Resources Agency handles licenses, seasons and public-land maps for Blount County. A landowner near Eagleton Village is more likely to say yes to a hunter who names the exact parcel and offers a phone number.
The Blount County economy in brief
The Census Bureau's County Business Patterns counted 2,519 business establishments in Blount County in 2022, and the largest groups were retail trade, other services, and construction. Relative to the U.S. as a whole, Blount County is heavy on air transportation and transportation equipment manufacturing. Manufacturing jobs in the county help keep house lots and small acreage in demand, including around Friendsville. For a land buyer in Blount County, that mix hints at who your neighbors and competing bidders are likely to be.
A note on timing and acreage
Splits and sales near Eagleton Village can take weeks or months to show up on the parcel layer. Acreage on the Blount County map is a tax figure; a survey is what a lender or buyer should rely on.
Frequently asked questions
How do I find property lines in Blount County, Tennessee?
For a lot in Alcoa, start with the parcel map, then get the recorded plat; a surveyor sets the exact corners.
Is the Blount County, TN parcel map free to use?
Anyone can browse the Blount County parcels at no charge, from lots in Alcoa to rural tracts near Eagleton Village.
How can I tell who owns land near Rockford?
Owner names for parcels from Rockford to Alcoa are on the Tennessee Property Viewer; search by address or click the map.
Where are land records kept in Blount County?
Recorded documents for Blount County sit with the county's recording office, whatever its local title; the county website tells you where to go.
Open the official Blount County, TN parcel map Blount County in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.