Blog · October 14, 2026 · Georgia
Candler County Flood Zone Map, Georgia
Look up any Candler County address on FEMA's flood map, read the zone, and match it to the parcel record for land around Pulaski.
Main page: Candler County, GA GIS & Parcel Viewer (official map link, Candler County facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
The Candler County flood zone map question tends to arrive at a bad moment: a lender's letter, an insurance quote, or a permit counter in Metter. FEMA's free Flood Map Service Center and the Candler County parcel viewer answer it together.
Next: FEMA's search tool, the zone labels you'll see for Candler County, and how the parcel record confirms which tract you're on.
How to use the Candler County flood zone map
The authoritative source for a Candler County flood zone map is FEMA, so begin at the FEMA Flood Map Service Center. Download the FIRM panel FEMA lists as effective for that part of Candler County. For an interactive view of Candler County, FEMA's National Flood Hazard Layer viewer draws the zones over aerial imagery, which shows how much of a Candler County parcel sits inside the zone. Then open the Candler County qPublic map for Candler County to confirm the parcel near Pulaski. Match the Candler County lines and acreage to the FEMA view, since flood maps do not draw property lines in detail.
Finding the tract on the Candler County map
The county's own public map is the Candler County qPublic map, built on Schneider Geospatial's qPublic platform, and it opens without an account for parcels in Metter and the rest of the county. Search a Pulaski address on the county search page, read the report, then jump to the map to see that parcel's outline. Bookmark our Candler County page too; it tracks the official Georgia link if it moves and lists the maps around Metter.
Zone A, AE and X in plain English
Any Candler County parcel shaded as Zone A, AE, AH or AO sits in what FEMA calls a Special Flood Hazard Area, defined by a 1-percent annual chance of being flooded. Zone AE near Metter means FEMA published a base flood elevation; plain Zone A means no detailed elevation was studied. If a Candler County parcel shows shaded Zone X, it falls between the base flood and the 500-year flood. Unshaded X (or C) on the Candler County panel means minimal risk.
Unmapped creeks in Candler County
A creek near Metter that shows no detailed zone, which is why it is worth walking the ground after a heavy rain.
Questions to ask before buying in Candler County
Request any past flood claims history for a Candler County property before closing; it tells you more than the map alone. Quotes for land near Metter depend on the zone and the building's elevation, so bring both to the agent.
Reading the fine print on a Candler County panel
Zones on the map covering Pulaski can change after a restudy, so the date on the county panel matters. If a parcel near Pulaski shows a hatched floodway, expect tight limits on fill and new structures from the county floodplain office.
What a flood zone means for a Candler County buyer
Lenders watch the zone closely on Candler County properties. When a structure near Metter falls inside an A or V zone and carries a federally backed mortgage, a flood policy becomes a loan condition; that applies where the local government around Metter is in the National Flood Insurance Program. Outside the A zones around Metter, insurance is a choice, not a mandate, although some lenders require it anyway. Where a structure near Pulaski looks higher than the shading suggests, a Letter of Map Amendment request is the formal route; a surveyor near Metter can supply the elevation data. Adding on to a house near Metter inside the zone typically needs a floodplain permit; the county floodplain administrator can say what applies.
Candler County, GA: common questions
Can a flood zone in Candler County be changed?
An owner near Metter can request a Letter of Map Amendment from FEMA with elevation data, typically from a professional surveyor.
What is a base flood elevation for a Candler County property?
For a Candler County property in Zone AE, the BFE is the height floodwater is expected to reach in the 1-percent-annual-chance flood, and it is printed in AE zones.
Is there a floodplain layer in the Candler County qPublic map?
Check the layer list in the Candler County qPublic map; if Candler County includes a floodplain layer, confirm the zone on FEMA's map anyway.
What does 100-year flood mean for Candler County land?
No, ground around Pulaski mapped that way has a 1-percent chance of flooding every year, not a once-a-century schedule.
Where can I see flood zones for land near Metter?
Look it up at FEMA's Flood Map Service Center, then match the parcel lines in the county qPublic map; for land near Metter, a zone starting with A or V is high risk.
Open the official Candler County, GA parcel map Candler County in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.