North Carolina · All counties
North Carolina Parcel Maps & County GIS Viewers
From Blue Ridge hollows to Outer Banks lots, this North Carolina hub lists official county GIS viewers for tax parcel and PIN search.
We link out — we do not host parcels. Platbookmapper does not draw lot lines, embed county FeatureServers, or redistribute tax-parcel geometry for North Carolina. Our role is to connect you to the official county GIS / parcel viewer that maintains the property information. Not a survey product.
PIN search across NC counties
We link out only. Choose a county, open its GIS, and search by PIN/parcel ID, address, or owner. Piedmont metro counties usually ship full-featured apps; mountain and coastal counties add slope or flood context beside the same tax fabric.
North Carolina relies on recorded plats and metes-and-bounds more than western PLSS grids. PINs are county-assigned. Barrier-island parcels deserve extra attention to coastal setbacks shown on planning layers. Always confirm the official county domain before citing attributes.
Tax parcels are not surveys. Verify with recorded plats or a licensed surveyor.
Outer Banks lots may carry multiple overlapping planning constraints—open the attribute panel after you select the PIN. Piedmont subdivisions usually geocode cleanly by address; mountain roads less so. We host no NC geometry.
Mountain private drives often lack clean address points—PIN search first. Coastal PINs should be read alongside any flood layer the county publishes.
Use this hub as the durable index when a county migrates from one ArcGIS app to another; we curate outbound links without hosting NC parcels.
Plat and parcel guides
These articles cover plat maps, parcel maps, and property lines for this state. The list below opens the official local GIS viewer.
- Property Lines Map NC
- Macon County, NC Parcel Viewer, GIS & Plat Map Guide
- New Hanover County, NC Parcel Viewer, GIS & Plat Map Guide
- Jackson County, NC Parcel Viewer, GIS & Plat Map Guide
- Henderson County, NC Parcel Viewer, GIS & Plat Map Guide
- Haywood County, NC Parcel Viewer, GIS & Plat Map Guide
- Brunswick County, NC Parcel Viewer, GIS & Plat Map Guide
- Johnston County, NC Parcel Viewer, GIS & Plat Map Guide
All North Carolina counties (100)
100 with curated official GIS links; remaining counties use the verify path via the map.
- Alamance County
- Alexander County
- Alleghany County
- Anson County
- Ashe County
- Avery County
- Beaufort County
- Bertie County
- Bladen County
- Brunswick County
- Buncombe County
- Burke County
- Cabarrus County
- Caldwell County
- Camden County
- Carteret County
- Caswell County
- Catawba County
- Chatham County
- Cherokee County
- Chowan County
- Clay County
- Cleveland County
- Columbus County
- Craven County
- Cumberland County
- Currituck County
- Dare County
- Davidson County
- Davie County
- Duplin County
- Durham County
- Edgecombe County
- Forsyth County
- Franklin County
- Gaston County
- Gates County
- Graham County
- Granville County
- Greene County
- Guilford County
- Halifax County
- Harnett County
- Haywood County
- Henderson County
- Hertford County
- Hoke County
- Hyde County
- Iredell County
- Jackson County
- Johnston County
- Jones County
- Lee County
- Lenoir County
- Lincoln County
- Macon County
- Madison County
- Martin County
- McDowell County
- Mecklenburg County
- Mitchell County
- Montgomery County
- Moore County
- Nash County
- New Hanover County
- Northampton County
- Onslow County
- Orange County
- Pamlico County
- Pasquotank County
- Pender County
- Perquimans County
- Person County
- Pitt County
- Polk County
- Randolph County
- Richmond County
- Robeson County
- Rockingham County
- Rowan County
- Rutherford County
- Sampson County
- Scotland County
- Stanly County
- Stokes County
- Surry County
- Swain County
- Transylvania County
- Tyrrell County
- Union County
- Vance County
- Wake County
- Warren County
- Washington County
- Watauga County
- Wayne County
- Wilkes County
- Wilson County
- Yadkin County
- Yancey County
North Carolina counties by the numbers
North Carolina has 100 counties (Census Bureau geography) and an estimated 11,197,968 residents on July 1, 2025, up 7.2% from the April 2020 base. The five most populous hold 34% of the people.
Most populous counties
| # | Name | 2025 estimate | Change since 2020 |
|---|---|---|---|
| 1 | Wake County | 1,257,235 | +11.3% |
| 2 | Mecklenburg County | 1,233,383 | +10.6% |
| 3 | Guilford County | 562,234 | +3.9% |
| 4 | Forsyth County | 401,718 | +5.0% |
| 5 | Durham County | 347,240 | +6.9% |
| 6 | Cumberland County | 338,473 | +1.1% |
| 7 | Buncombe County | 277,417 | +3.0% |
| 8 | Union County | 267,674 | +12.4% |
| 9 | Johnston County | 256,448 | +18.7% |
| 10 | Cabarrus County | 249,725 | +10.6% |
Fastest growing and shrinking since 2020
14 of 100 counties had fewer residents in 2025 than in April 2020.
| Fastest growing | Change | Biggest decline | Change |
|---|---|---|---|
| Brunswick County | +27.8% | Hertford County | -11.8% |
| Pender County | +19.8% | Northampton County | -5.6% |
| Franklin County | +19.5% | Bertie County | -4.7% |
| Johnston County | +18.7% | Halifax County | -4.3% |
| Currituck County | +18.0% | Washington County | -3.3% |
Largest and smallest by land area
| Largest | Land sq mi | Smallest | Land sq mi |
|---|---|---|---|
| Robeson County | 947 | Chowan County | 173 |
| Sampson County | 946 | New Hanover County | 192 |
| Columbus County | 938 | Clay County | 215 |
| Bladen County | 875 | Mitchell County | 221 |
| Pender County | 871 | Pasquotank County | 227 |
Border counties
41 of 100 counties touch another state, per the Census Bureau county adjacency file. Useful when a property, road or survey crosses a state line: each side keeps its own parcel records.
- Georgia: Cherokee County, Clay County, Macon County
- South Carolina: Anson County, Brunswick County, Cleveland County, Columbus County, Gaston County, Henderson County, Jackson County, Macon County, Mecklenburg County, Polk County, Richmond County, Robeson County, Rutherford County, Scotland County, Transylvania County, Union County
- Tennessee: Ashe County, Avery County, Cherokee County, Graham County, Haywood County, Madison County, Mitchell County, Swain County, Watauga County, Yancey County
- Virginia: Alleghany County, Ashe County, Camden County, Caswell County, Currituck County, Gates County, Granville County, Hertford County, Northampton County, Person County, Rockingham County, Stokes County, Surry County, Vance County, Warren County
Where the official GIS links lead
The 100 official GIS buttons on this page open these platforms (counted from the links themselves):
- Esri ArcGIS Online: 28
- WebGIS (webgis.net): 6
- nc.us: 3
- roktech.net: 3
- agdmaps.com: 3
- alamance-nc.com: 1
- alexandercountync.gov: 1
- ansoncountygis.com: 1
- Other sites (54): 54
Sites built on the same platform tend to work the same way, so once you learn one Beacon or ArcGIS viewer the rest feel familiar.
Related
- All state hubs (A–Z)
- Nationwide county GIS map
- Parcel map & property search guides
- How this directory works
Frequently asked questions
How do I find a North Carolina county parcel map?
Pick your county on this North Carolina hub (or on the national Platbookmapper map), then open the official GIS / parcel viewer link. Each county maintains its own app — we link out and do not host parcels.
Are North Carolina online parcel maps survey-grade?
No. County GIS parcels are tax and planning layers. For legal boundaries, use a recorded plat or hire a licensed surveyor.
Why do some North Carolina counties say Verify via map?
We only mark a county Listed when we have a curated direct interactive viewer URL. Verify counties still open from the national map with the best available outbound link — always confirm it is the official local source.
Does Platbookmapper draw property lot lines?
No. We do not host or redraw parcel geometry. Our product is a USA → county → official GIS link directory so you can open the local interactive map in a new tab.