Blog · October 14, 2026 · Wisconsin
Cedarburg Zoning Map, Wisconsin: what to check
Zoning decides what can be built where, and the answer for a lot near Port Washington starts with the right map.
Main page: Ozaukee County, WI GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Ahead of any building plan near Grafton, pull up the Cedarburg zoning map first: the zoning district can make or break the plan. In this Cedarburg guide: who controls zoning for a given parcel, how to match a parcel to its district, and what to ask the planning staff.
Getting started with the Cedarburg zoning map
Within municipal limits, zoning usually comes from the municipality, so property inside Cedarburg follows that code. Past the city line, around Port Washington, county rules apply where they exist; ask the county planning office to be sure. A fast way to settle it: check the municipal limits layer on the Ozaukee County parcel viewer.
The free map to start with
Go first to the Ozaukee County parcel viewer; it maps every tax parcel in the county, Mequon included. For property near Saukville, put in a street address, an owner's name or a parcel number, then pick the result to center the map on it. Closer to Mequon, the parcel card usually lists the owner of record, acreage on the tax roll, the parcel number and often a sale date.
Land on the county line
Ozaukee County borders Muskegon County, MI, Oceana County, MI, Milwaukee County, Sheboygan County, and Washington County, and each of those keeps its own parcel map. Ground near Bayside that runs to the line can be split across two assessors' files, so check the neighboring map before you assume the acreage. In and around Saukville, the Platbookmapper state page lists every neighboring county map across Wisconsin.
City limits and county records
Cedarburg lies within Ozaukee County, Wisconsin, and the county assessor maps its lots. Around Saukville, city or town hall handles matters such as zoning, permits and utilities within town limits, and the county still keeps the parcel and deed records. Land beyond the city limits toward Grafton often answers to county rules rather than the town's.
Building permits and inspections
Once zoning clears a project near Mequon, a building permit is a separate step; septic or sewer and driveway access are often reviewed too.
Finding a parcel's zoning district
Start by finding the parcel on the Ozaukee County parcel viewer, note the parcel number, and match it to the adopted zoning map. With a lot near Grafton, district codes like R-1, C-2 or A-1 point to a table of rules in the ordinance; the letters vary from place to place.
Getting your bearings
Port Washington holds the county offices, home to the main records offices. Smaller places on the map include Grafton, Thiensville, Mequon, and Saukville, where town lots give way to larger tracts. About 93,460 people call Ozaukee County home (Census Bureau estimate, 2023) across some 233 square miles. Ozaukee County was organized in 1853, and some chains of title near Port Washington are long. Features like Lake Michigan and Lion's Den Gorge Nature Preserve make handy reference points on the map near Bayside.
What to ask before you buy
When you call about land near Port Washington, give the parcel number and your intended use; ask what's allowed by right and what needs a permit. Also ask whether the lot near Mequon is a legal lot of record, because nonconforming lots can carry limits.
Rules tied to a district
On ground around Port Washington, the ordinance spells out uses allowed by right, uses needing a permit, and uses not allowed. For land near Thiensville, overlay districts, whether historic, floodplain or corridor, may apply even when the base zoning looks simple.
Using it on a phone
The parcel map usually runs in a mobile browser, useful out on a road near Mequon, though signal can drop in rural spots. A saved image of the lot near Saukville and its lines is a good backup.
Reading the legal description
Wisconsin is laid out under the Public Land Survey System, so deeds around Saukville reference sections and townships. Each section is nominally a mile square, about 640 acres, with 36 sections to a township, though sections near Bayside can be irregular. Write down the legal description for the tract near Mequon when you talk to a surveyor.
When a plan doesn't fit
On ground around Mequon, most of these involve time, so budget weeks or months before you close.
A word on accuracy
Listed acreage is a tax-roll number; just a licensed surveyor establishes the real corners for a parcel near Mequon. For acreage around Port Washington, owner names and values update on a schedule, so a deed recorded last month may not show yet.
Questions about the Cedarburg zoning map
Can I see zoning on the parcel viewer for Cedarburg?
Good question; the county map may show zoning for parcels near Port Washington, but the adopted map from the planning office is the official version.
What are setbacks for land near Mequon?
Setbacks near Thiensville depend on the zoning district.
Is land outside Cedarburg zoned?
Short answer: county rules near Mequon vary; confirm with the county office.
What does a rezoning in Cedarburg involve?
Short answer: the governing body near Port Washington decides after hearings; ask about fees and timelines early.
Who do I call about a parcel near Saukville?
The county real property listing office handles values and the tax roll, and the Register of Deeds keeps deeds; planning offices cover zoning near Mequon
Open the official Ozaukee County, WI parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.