Blog · October 14, 2026 · Alabama
Cleburne County Flood Zone Map, Alabama
Look up any Cleburne County address on FEMA's flood map, read the zone, and match it to the parcel record for land around Fruithurst.
Main page: Cleburne County, AL GIS & Parcel Viewer (official map link, Cleburne County facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
A Cleburne County flood zone map check belongs in the due diligence for any Cleburne County property, from a house lot in Edwardsville to farm ground near Ranburne. You can check it yourself for any Edwardsville address in a few minutes.
We'll cover finding a Cleburne County address on FEMA's map, what Zone A, AE and X mean, how the county viewer fits in, and what to do if the map looks wrong.
How to use the Cleburne County flood zone map
Open the FEMA Flood Map Service Center and type a county street address, say one in Fruithurst. If a tract near Edwardsville has no street number yet, search the nearest road and pan to it. For an irregular lot near Edwardsville, try FEMA's National Flood Hazard Layer viewer, so you can see if the shading reaches a house near Edwardsville. Switch to the Cleburne County ArcGIS parcel map and find the same tract near Edwardsville. The Cleburne County record gives the parcel identifier and legal description that an insurer or lender near Fruithurst may ask for.
Opening the Cleburne County parcel viewer
For land around Ranburne, open the Cleburne County ArcGIS parcel map (an Esri ArcGIS web map); it's the map Cleburne County itself publishes. Use the search box for an address in Heflin or a parcel number, or simply zoom in and click a tract near Ranburne. Our Cleburne County, AL page keeps the official link and the maps next door to Ranburne in one place.
What the flood zone letters mean
For a lot in Fruithurst, the label matters more than the color: A and V zones are Special Flood Hazard Areas, land with a 1-percent chance of flooding in any given year (the base or 100-year flood). Where a Cleburne County tract lists Zone AE, there's a base flood elevation to compare a building against; in Zone A there isn't one. If a Cleburne County parcel lists shaded Zone X, it is moderate risk, between the 1-percent and 0.2-percent annual chance lines. Unshaded X (or C) on the Cleburne County panel means minimal risk.
Unmapped creeks in Cleburne County
A low spot on a Cleburne County tract outside any mapped zone, which is why it's worth walking the ground after a heavy rain.
A short buyer checklist for Edwardsville
For a house near Fruithurst, ask the seller for any elevation certificate on file and the current flood insurance declarations page. Then call an insurance agent who writes policies around Edwardsville and get a quote using the zone and the county parcel address.
Floodways and restudies near Fruithurst
Zones on the map covering Fruithurst can change after a restudy, so the date on the county panel matters. Floodways, shown as hatched areas on some panels, are the channel and nearby land that must stay open, and building there near Heflin faces the strictest rules.
Insurance, permits and map changes
Lenders watch the zone closely on Cleburne County properties. When a Cleburne County home sits in a Special Flood Hazard Area and secures a loan from a federally regulated or insured lender, federal rules call for flood insurance under the Flood Disaster Protection Act, wherever the community joins the NFIP. In Zone X near Fruithurst, coverage is optional, although a lender in Alabama can still ask for it. If a building near Edwardsville sits above the flood line, a Letter of Map Amendment request is the formal route, supported by elevation data from a professional surveyor. Placing fill on low ground near Fruithurst commonly requires a permit and an elevation check, and the building office serving Edwardsville explains the steps.
Cleburne County flood zones questions
Is there a floodplain layer in the Cleburne County ArcGIS parcel map?
Check the layer list in the Cleburne County ArcGIS parcel map; if Cleburne County includes a floodplain layer, confirm the zone on FEMA's map anyway.
My house near Edwardsville is in Zone X. Is insurance required?
Not under federal rules; Zone X in Cleburne County is outside the Special Flood Hazard Area, although a lender can still require coverage.
What is a base flood elevation for a Cleburne County property?
On the map covering Fruithurst, it's the projected water surface in the base flood; elevation certificates in Cleburne County are measured against it.
Can a flood zone in Cleburne County be changed?
For a lot in Fruithurst, hire a surveyor for an elevation certificate, then file a LOMA request with FEMA.
Who prepares an elevation certificate for a house in Fruithurst?
A professional surveyor or engineer prepares it, and the building office serving Fruithurst may already have one on file for newer construction.
Can I build in a flood zone in Cleburne County?
Building in a Special Flood Hazard Area near Fruithurst usually needs a floodplain permit and may require elevating the structure, so check with the county floodplain administrator.
Open the official Cleburne County, AL parcel map Cleburne County in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.