Blog · October 14, 2026 · Texas
Using the Cochran County Flood Zone Map
Flood zones are set by FEMA, and checking one near Bledsoe takes a few minutes.
Main page: Cochran County, TX GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Weighing a property around Whiteface? The Cochran County flood zone map tells you whether FEMA puts it in a high-risk zone, and the lookup is free. This Cochran County guide covers: locating a parcel on FEMA's map, reading the zone codes, and pairing it with the Cochran CAD interactive map.
Where the Cochran County flood zone map lives
For a more interactive look, open the National Flood Hazard Layer viewer, which lets you click a spot and read its zone, for land near Morton included. Rural land near Lehman with no street number can still be found: zoom in from the nearest road and click inside the land.
Getting to the right map
For property near Whiteface, the official parcel map for this area is the Cochran CAD interactive map, and no login is needed to use it. For land near Famuliner, type a street address, an owner's name or a parcel number, and the matching parcel lights up. For a parcel near Bledsoe, save the parcel ID from that panel; every records desk in the county will want it.
Questions to ask before you buy
If the land is near Whiteface, ask the listing agent about past flood claims before closing; an insurance quote early keeps the budget honest.
Zones on the Cochran County flood zone map
For a home near Bledsoe, A and V zones are Special Flood Hazard Areas, which FEMA defines as a 1% annual chance of flooding. For a home near Griffith, shaded Zone X is moderate risk, roughly the 100- to 500-year range; unshaded X is minimal risk.
Getting your bearings
Morton is the county seat, where most land records are kept. Other places on the map include Bledsoe, Whiteface, Famuliner, and Griffith, each with its own cluster of lots. Around 2,509 people call Cochran County home (Census estimate, 2023) across roughly 775 square miles. Cochran County dates to 1924, which matters when you trace an old farm's title.
Beyond the mapped zones
Low-lying fields near Bledsoe aren't always studied in detail, so look for water marks and debris lines. Wetlands near Famuliner can limit building even outside a flood zone; check the National Wetlands Inventory mapper for a first look.
Backing up the map with records
For anything that matters, pull the recorded deed from the County Clerk; the parcel line is a drawing of it, whether the land is near Griffith or elsewhere in the county. For a home near Lehman, bring the instrument number shown in the record panel to skip a name search.
Use the county map alongside FEMA
FEMA doesn't draw property lines, so pair it with the Cochran CAD interactive map to confirm you have the right parcel near Bledsoe.
Using it on a phone
Most viewers work in a phone browser, useful out on a road near Bledsoe, so load it before you lose signal. A printout of the tract near Famuliner is a good backup.
Money questions tied to the zone
If a building sits in a Special Flood Hazard Area and the loan is federally backed or regulated, the lender will require flood insurance in communities in the NFIP, whether the land is near Morton or elsewhere in the county. Building or adding on near Whiteface in a mapped zone often needs a floodplain permit; call the permitting office early.
Land on the county line
Cochran County touches Lea County, NM, Roosevelt County, NM, Bailey County, Hockley County, and Lamb County, and each of those keeps its own parcel map. A tract near the line by Griffith can be split in two county records, so look at the neighboring map as well. If the land is near Griffith, our state page lists every neighboring county map across Texas.
Reading the legal description
Older tracts around Bledsoe commonly use metes-and-bounds descriptions, listing bearings, distances and landmarks. Platted lots around Griffith refer to a recorded plat, which is simpler to follow. Write down the legal description for the tract near Bledsoe before you request a deed or survey.
A word on accuracy
If you're looking near Bledsoe, acreage on the record is an assessed number; only a licensed surveyor sets the real boundary on the ground. Near Griffith, records update in batches, so a deed recorded last month may not show yet.
Frequently asked
When is flood insurance required around Griffith?
In most cases, lenders generally require it for buildings near Lehman in a Special Flood Hazard Area when the loan is federally regulated or insured; outside those zones it's your call.
Can I see flood zones on the Cochran CAD interactive map near Whiteface?
Good question; a flood layer may appear in the Cochran CAD interactive map layer list; confirm a lot near Lehman on FEMA's map either way.
Is Zone X safe from flooding around Griffith?
For acreage around Whiteface, shaded X is moderate risk and unshaded X is minimal risk, and floods still happen outside high-risk zones.
Why does the BFE matter near Morton?
Out toward Griffith, the base flood elevation is the water level expected in the 1% annual chance flood; local rules may require building above it.
What's a legal description near Famuliner?
For property near Lehman, deeds use lot and block, metes and bounds or survey descriptions; copy it for any survey or title request.
Open the official Cochran County, TX parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.