Blog · October 14, 2026 · Texas
Culberson County Flood Zone Map, Texas
FEMA's free flood maps and the Culberson County parcel viewer, used together for property near Nickel Creek.
Main page: Culberson County, TX GIS & Parcel Viewer (official map link, Culberson County facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
The Culberson County flood zone map question tends to arrive at a bad moment: a lender's letter, an insurance quote, or a permit counter in Van Horn. FEMA's free Flood Map Service Center and the Culberson County parcel viewer answer it together.
We'll cover finding a Culberson County address on FEMA's map, what Zone A, AE and X mean, how the county viewer fits in, and what to do if the map looks wrong.
How to use the Culberson County flood zone map
FEMA's official flood maps for Culberson County are free at the FEMA Flood Map Service Center. The site returns the effective Flood Insurance Rate Map (FIRM) panel covering that Kent location, which you can view or download. For an interactive view of the county, the National Flood Hazard Layer viewer is easier to use, so you can see if the shading reaches a house near Van Horn. Switch to the Texas county CAD map and find the same property near Van Horn. Match the Culberson County lines and acreage to the FEMA view, since flood maps do not draw property lines in detail.
Search Culberson County parcels by owner, address or ID
Culberson County publishes its parcels on the Texas county CAD map, which runs on the ProdigyCAD maps portal, free to use for a lot in Kent or a property near Nickel Creek. Search the county appraisal map by owner, address or property ID; the pop-up for a property near Kent shows the account and legal description. If the official address for the Culberson County, TX map ever changes, our directory page carries the current link for Kent and the rest of the county.
Reading the zones on a Culberson County flood map
On the FIRM covering Culberson County, zones that start with A or V are Special Flood Hazard Areas, land with a 1-percent chance of flooding in any given year (the base or 100-year flood). Where a Culberson County tract shows Zone AE, there's a base flood elevation to compare a building against; in Zone A there isn't one. Shaded Zone X around Kent falls between the base flood and the 500-year flood. Unshaded X (or C) on the Culberson County panel means minimal risk.
Low ground and small streams around Kent
Small streams and ditches near Kent may not be studied in detail, so treat an unmapped channel as a reason to ask questions, not proof the ground stays dry.
Seller questions about flood history
Request any past flood claims history for a Culberson County property before closing; it tells you more than the map alone. Then call an insurance agent who writes policies around Nickel Creek and get a quote using the zone and the county parcel address.
Insurance, permits and map changes
Lenders watch the zone closely on Culberson County properties. If a house near Van Horn falls inside an A or V zone and carries a federally backed mortgage, the lender must require flood coverage, provided the community near Kent takes part in the National Flood Insurance Program. In Zone X near Kent, insurance is a choice, not a mandate, although some lenders require it anyway. If a building near Van Horn sits above the flood line, the titleholder can ask FEMA for a Letter of Map Amendment (LOMA); a surveyor near Van Horn can supply the elevation data. Adding on to a house near Van Horn inside the zone commonly requires a permit and an elevation check, and the building office serving Van Horn explains the steps.
Quick answers for Culberson County
Can a flood zone in Culberson County be changed?
FEMA reviews requests such as a LOMA for Culberson County properties; start with an elevation certificate.
What is a base flood elevation for a Culberson County property?
For a Culberson County property in Zone AE, it is the projected water surface in the base flood, and it is printed in AE zones.
What does 100-year flood mean for Culberson County land?
No, ground around Kent mapped that way carries a 1-in-100 chance in any single year, and two floods in one decade near Kent are possible.
My house near Nickel Creek is in Zone X. Is insurance required?
Not under federal rules; Zone X in Culberson County is outside the Special Flood Hazard Area, though a lender can still require coverage.
How do I know if a property in Culberson County is in a flood zone?
Look it up at FEMA's Flood Map Service Center, then match the parcel lines in the Texas county CAD map; for land near Nickel Creek, a zone starting with A or V is high risk.
Can I build in a flood zone in Culberson County?
Often, but local floodplain rules apply; ask the county or town building office in Kent before you buy.
Open the official Culberson County, TX parcel map Culberson County in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.