Platbookmapper County GIS Directory

Blog · October 14, 2026 · Kentucky

Reading the Danville Flood Zone Map for a parcel

The zone on FEMA's map affects insurance, building and resale near Perryville.

VIEW PLATBOOK MAPPER

A handheld GPS used to walk a rural parcel

Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.

Weighing a property around Junction City? The Danville flood zone map tells you whether it sits in a FEMA flood zone, and no account is needed. In this Danville guide: finding the address on FEMA's map, decoding A, AE and X, and pairing it with the Danville-Boyle County Planning & Zoning GIS Map.

Where the Danville flood zone map lives

The official source is FEMA's Flood Map Service Center: search an address around Junction City, and pick the FIRMette or map view. A tract near Perryville without an address is still easy to locate: pan from the closest town and click the spot.

Opening the official parcel viewer

The public parcel map for this area is the Danville-Boyle County Planning & Zoning GIS Map, and anyone can open it without signing up. Around Perryville, type a street address, an owner's name or a parcel number, and the viewer zooms to the match. For property near Perryville, the parcel card normally shows the owner of record, acreage on the tax roll, the parcel number and often a sale date.

Places you'll see on the map

Danville is the county seat, which is where the courthouse records live. You'll also find Junction City and Perryville. About 30,988 people live in Boyle County (Census Bureau estimate, 2023) on roughly 180 square miles. Boyle County was organized in 1842, and some chains of title near Perryville are long.

Older tracts around Perryville commonly use metes-and-bounds descriptions, listing bearings, distances and landmarks. Town lots near Perryville are typically described by lot and block, making them easier to find. Keep the legal description for land near Perryville before you request a deed or survey.

Next door to Boyle County

Boyle County borders Casey County, Garrard County, Lincoln County, Marion County, and Mercer County, and each of those keeps its own parcel map. Acreage along the edge near Perryville may be split in two county records, so look at the neighboring map too. Our state page lists every neighboring county map for Kentucky.

What the map can't tell you

Listed acreage is an estimate; only a licensed surveyor establishes the real lines for a parcel near Perryville. Records update in batches, so a recent sale near Junction City can take weeks to appear.

City limits and county records

Danville lies within Boyle County, Kentucky, and the county assessor maps its lots. Danville is also the county seat, which puts the County Clerk close by. If you're looking near Junction City, City or town hall handles matters such as zoning, permits and utilities within town limits, and the county still keeps the parcel and deed records. Land beyond the city limits toward Junction City generally falls under county rules instead.

Taking the map into the field

The parcel map usually runs in a mobile browser, which helps when you're standing on land near Perryville, but coverage can be spotty out of town. A screenshot of the parcel near Perryville with its ID helps when you meet an owner or agent.

Zones on the Danville flood zone map

In and around Junction City, any A or V zone are Special Flood Hazard Areas, land with a 1-percent chance of flooding in any year. Closer to Perryville, minimal risk is not no risk: according to FEMA, many claims come from moderate- and low-risk areas.

Questions to ask before you buy

Request about past flood claims for the house near Perryville; getting a quote early keeps the budget honest.

Beyond the mapped zones

Low-lying fields near Perryville aren't always studied in detail, so ask neighbors about past flooding. Wet ground around Perryville is a separate issue from flood zones; the National Wetlands Inventory mapper shows mapped wetlands.

Parcel lines plus flood zones

FEMA's map shows zones but not ownership, so check the Danville-Boyle County Planning & Zoning GIS Map too to see exactly which lot near Junction City you're looking at.

Lenders and permits

For a tract near Junction City, get the Elevation Certificate if one exists: it can change the insurance price a lot. Remodeling a house in a zone near Perryville often needs a floodplain permit; ask the local floodplain administrator early.

Frequently asked

What is a LOMA near Junction City?

For most people, you can ask FEMA for a LOMA if surveyed elevations show the building near Junction City is above the BFE, and lenders accept the result.

What does an AE label mean for a lot near Junction City?

An AE zone has a 1% annual chance of flooding and a base flood elevation, so builders near Perryville design to that elevation.

What is a base flood elevation around Perryville?

It depends, but a BFE near Junction City tells builders how high the lowest floor should be; surveyors near Perryville use it often.

Will my lender require flood insurance near Perryville?

Good question; lenders generally require it for buildings near Perryville in a Special Flood Hazard Area when the loan is federally regulated or insured, in communities that take part in the NFIP.

How do I save a parcel from the viewer for land near Perryville?

Use the print button or a screenshot; include the record panel for the lot near Junction City.

Open the official Boyle County, KY parcel map See it in the Platbookmapper directory

Related

← All posts · Open the map