Blog · October 14, 2026 · North Carolina
Reading the Davidson County Flood Zone Map for a parcel
Flood zones are set by FEMA, and checking one near Tyro takes a few minutes.
Main page: Davidson County, NC GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before an offer near Denton, look at the Davidson County flood zone map: the zone on that map shapes insurance, building rules and resale. This Davidson County guide covers: the free FEMA tools, what each zone label means, lender insurance rules and what a LOMA is.
Checking the Davidson County flood zone map step by step
For property near Midway, flood zones come from FEMA's Flood Map Service Center: enter the street address, and choose the dynamic map. Vacant ground around Friedberg can still be found: zoom in from US Route 29 then click the parcel area.
Getting to the right map
Your first stop is the Davidson County parcel viewer; it maps each assessed parcel in the county, Wallburg included. When a rural tract has no street number, pan along US Route 29 and select the outline, which applies near Thomasville as much as anywhere. If you're looking near Tyro, a pop-up or side panel usually lists the owner of record, assessed acreage, a parcel ID and sometimes recent sales.
Reading A, AE and X
With a lot near Friedberg, any A or V zone mark the Special Flood Hazard Area, which FEMA defines as a 1% annual chance of flooding. Out toward Arcadia, a shaded X area marks moderate flood hazard, between the 1% and 0.2% annual chance floods; unshaded X means minimal mapped risk.
How land is described here
Older tracts around Wallburg are often described by metes and bounds, listing bearings, distances and landmarks. Subdivision lots in High Point usually use lot and block from a recorded plat instead, which is simpler to follow. Write down the legal description for the tract near Thomasville before you request a deed or survey.
Next door to Davidson County
The county borders Davie County, Forsyth County, Guilford County, Montgomery County, and Randolph County, all with their own assessor records for land near Denton. Acreage along the edge near Denton may show up in two county records, so check the adjacent map before you assume the acreage. On ground around Southmont, our state page links each neighboring county map for North Carolina.
Before you lean on the lines
For acreage around Denton, acreage on the record is an assessed number; only a licensed surveyor establishes the real corners on the ground. For a tract near Southmont, records update in batches, so a deed recorded last month may not show yet.
Using it on a phone
The parcel map usually runs in a mobile browser, useful out on a road near Southmont, so load it before you lose signal. A screenshot of the parcel near Thomasville with its ID is a good backup.
A short flood checklist
For property near Uwharrie National Forest, ask the seller about past flood claims before closing; getting a quote early avoids surprises.
Parcel lines plus flood zones
FEMA doesn't draw property lines, so open the Davidson County parcel viewer next to see exactly which lot near Denton you're looking at.
Beyond the mapped zones
Low-lying fields near Midway aren't always studied in detail, so ask neighbors about past flooding. Wet ground around Wallburg is a separate issue from flood zones; the National Wetlands Inventory mapper shows mapped wetlands.
Getting answers from the right desk
For assessment questions about property around Welcome belong with the county tax office, which maintains the tax roll. Questions about what you can build around Wallburg are for the local planning and health departments, depending on whether the land is inside town limits.
Money questions tied to the zone
For a structure inside an A or V zone and a federally regulated lender is involved, the lender will require flood insurance in communities in the NFIP, and that holds around Southmont too. Building or adding on near High Point in a mapped zone can trigger elevation rules; ask the local floodplain administrator before you plan.
Places you'll see on the map
Lexington holds the county offices, which is where the courthouse records live. You'll also find High Point, Thomasville, Denton, and Midway, where town lots give way to larger tracts. Roughly 174,804 people live in this county (Census estimate, 2023) spread over some 553 square miles, especially near Denton. Davidson County was organized in 1822, so old deeds can run back a long way. Landmarks such as Uwharrie National Forest help you orient on the aerial around Arcadia.
Quick answers
Does the county parcel map show flood zones for land near Denton?
Good question; the parcel map near Thomasville might show FEMA zones, though it can lag behind FEMA's current panels.
When is flood insurance required near Denton?
If the land is near High Point, it's typically required only for structures in high-risk zones with federally backed loans; outside those zones it's your call.
What is a base flood elevation near Thomasville?
Good question; a BFE near Tyro tells builders how high the lowest floor should be; local rules may require building above it.
What is the difference between Zone A and AE near High Point?
For land near High Point, both are high-risk zones, but only AE has a base flood elevation; unnumbered A zones don't list one.
How do I save a parcel from the viewer in Davidson County?
With a lot near Welcome, some viewers offer PDF export; downloads of raw data vary by county.
Open the official Davidson County, NC parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.