Blog · October 14, 2026 · North Dakota
Using the Dickinson Flood Zone Map
The zone on FEMA's map affects insurance, building and resale near Richardton.
Main page: Stark County, ND GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before you buy or build near Taylor, look at the Dickinson flood zone map: a mapped flood zone changes insurance, building rules and resale. This Dickinson guide covers: finding the address on FEMA's map, reading the zone codes, and pairing it with the Stark County ArcGIS parcel map.
The Dickinson flood zone map: start here
Flood zones come from FEMA's Flood Map Service Center: search an address around Belfield, and choose the dynamic map. Rural land near Taylor with no street number is still easy to locate: zoom in from US Route 85 and click the spot.
The free map to start with
Lots and tracts near Belfield can be looked up on the Stark County ArcGIS parcel map, free to use and open without a login. On ground around Belfield, enter a street address, an owner's name or a parcel number, and the viewer zooms to the match. If the land is near Gladstone, a pop-up or side panel normally shows the owner of record, acreage on the tax roll, a parcel ID and in many cases the last transfer.
City limits and county records
Dickinson sits in Stark County, North Dakota, so its parcels are on the county's map. As the county seat, Dickinson hosts the courthouse, which puts the County Recorder close by. For a tract near Taylor, the municipality handles matters such as zoning, permits and utilities inside its limits, and the county still keeps the parcel and deed records. Lots just outside the town limits near Gladstone often answers to county rules rather than the town's.
Reading the legal description
North Dakota is laid out under the Public Land Survey System, so rural legal descriptions near Belfield cite section, township and range. Each section is nominally a mile square, about 640 acres, and a township holds 36 of them, though sections near Taylor can be irregular. Keep the legal description for land near Belfield when you talk to a surveyor.
What to request from a seller
Ask the seller for any Elevation Certificate on the property near Gladstone; getting a quote early keeps the budget honest.
Which office to call
Anything recorded against property around South Heart sit in the index kept by the County Recorder, usually searchable by name or document number. Zoning, permits and septic questions near Richardton are for the local planning and health departments, depending on whether the land is inside town limits.
Reading A, AE and X
Zone AE comes with a base flood elevation, while plain Zone A does not; builders around South Heart design to it. Around Belfield, shaded Zone X marks moderate flood hazard, roughly the 100- to 500-year range; plain X, or C on older maps, is minimal risk.
Low spots and local drainage
Low-lying fields near Richardton aren't always studied in detail, so ask neighbors about past flooding. Marshy spots near Richardton can limit building too; the National Wetlands Inventory mapper shows mapped wetlands.
Matching the zone to the lot lines
FEMA's map shows zones but not ownership, so pair it with the Stark County ArcGIS parcel map for the outline of the tract near Richardton.
Taking the map into the field
The parcel map usually runs in a mobile browser, useful out on a road near Belfield, though signal can drop in rural spots. A screenshot of the parcel near Richardton with its ID is a good backup.
What a flood zone means for a buyer
For a structure inside an A or V zone and the loan is federally backed or regulated, mandatory purchase rules apply where the community participates in the National Flood Insurance Program, which applies near Belfield as much as anywhere. Building or adding on near South Heart in a mapped zone can trigger elevation rules; check with the county or town building office early.
Neighboring parcel maps
Stark County touches Billings County, Dunn County, Grant County, Hettinger County, and Mercer County; every one of them runs a separate parcel map. A tract near the line by Taylor can show up in two county records, so look at the neighboring map as well. On ground around Gladstone, the Platbookmapper state page links each bordering county map for North Dakota.
Frequently asked
Is there a flood layer on the parcel viewer near Richardton?
In most cases, a flood layer may appear in the Stark County ArcGIS parcel map layer list, though it can lag behind FEMA's current panels.
What is a LOMA for land near South Heart?
FEMA's LOMA process is the usual route when a building near Taylor sits above the base flood elevation, and lenders accept the result.
What is a base flood elevation around Belfield?
Good question; a BFE near South Heart tells builders how high the lowest floor should be, and an Elevation Certificate compares the building to it.
How often are flood maps updated for land near South Heart?
It depends, but a new study can move a zone line near Gladstone; check the effective date on the panel.
Is there an app for the parcel map near Gladstone?
The map near Belfield usually works on a phone; load it before you lose coverage near South Heart.
Open the official Stark County, ND parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.