Blog · October 14, 2026 · Wyoming
Using the Douglas Zoning Map
A parcel's zoning district shapes building, splitting and business use near Rolling Hills.
Main page: Converse County, WY GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Ahead of any building plan near Lost Springs, pull up the Douglas zoning map before anything else: the zoning district decides setbacks, lot size and uses. Covered here for the town: which office sets the rules for a lot, how to match a parcel to its district, and what to ask the planning staff, at least around Lost Springs.
The Douglas zoning map: start here
Inside town or city limits, the town or city normally writes the zoning code, so property inside Douglas answers to that map. For rural land toward Glenrock, the county may have its own zoning, or none at all; ask the county planning office to be sure. The quickest way to tell which applies: check the municipal limits layer on the Converse County parcel viewer.
Where the parcel data lives
Go first to the Converse County parcel viewer; it maps every assessed parcel in the county, Glenrock included. With a lot near Lost Springs, type a street address, an owner's name or a parcel number, then pick the result to center the map on it. With a lot near Rolling Hills, write down the parcel ID while you have it open; each records desk in the county uses it to find the file.
A quick look at the area
Douglas is the county seat, where most land records are kept. You'll also find Glenrock, Rolling Hills, and Lost Springs. About 13,809 people live in Converse County (Census estimate, 2023) across about 4,255 square miles. Converse County dates to 1888, so old deeds can run back a long way. Features like Medicine Bow National Forest are easy to spot when you zoom out from Lost Springs.
Douglas and the county around it
Douglas lies within Converse County, Wyoming, and the county assessor maps its lots. As the county seat, Douglas hosts the courthouse, which puts the County Clerk close by. In and around Rolling Hills, city or town hall handles matters such as zoning, permits and utilities within town limits, while the county keeps the tax map. Acreage past the city limits near Lost Springs usually falls under county rules rather than the town's.
How land is described here
Wyoming follows the Public Land Survey System, so deeds around Glenrock reference sections and townships. A standard section is about one square mile, roughly 640 acres, with 36 sections to a township, though real sections near Lost Springs vary in size. Keep the legal description for land near Glenrock when you talk to a surveyor.
When a parcel crosses a boundary
Converse County borders Albany County, Campbell County, Carbon County, Johnson County, and Natrona County, and each of those keeps its own parcel map. A tract near the line by Rolling Hills can be split across two assessors' files, so open the adjacent map before you assume the acreage. On ground around Rolling Hills, our state page lists each bordering county map for Wyoming.
Permits after zoning
Once zoning clears a project near Lost Springs, a building permit is a separate step; health and road departments may weigh in on land near Rolling Hills.
Calling planning staff
When you call about land near Rolling Hills, give the parcel number and your intended use; staff can point to the right section of the ordinance. Also ask whether the lot near Glenrock is a legal lot of record, since some older splits don't.
Using it on a phone
Most viewers work in a phone browser, which helps when you're standing on land near Glenrock, but coverage can be spotty out of town. A printout of the tract near Rolling Hills helps when you meet an owner or agent.
How to look up the district
Start by finding the parcel on the Converse County parcel viewer, note the parcel number, and match it to the adopted zoning map. For acreage around Glenrock, district codes like R-1, C-2 or A-1 point to a table of rules in the ordinance; the letters vary from place to place.
What the district controls
On a lot around Douglas, the numbers to find are lot size, setbacks, height and coverage. For a home near Glenrock, overlay districts, such as floodplain, historic or airport zones, can add rules on top of the base district.
Asking for an exception
If your plan near Lost Springs doesn't fit the district, the usual routes are a variance, a special use permit or a rezoning.
Where the recorded documents are
The map is an index, not the title: deeds, plats and easements for land near Rolling Hills are filed with the County Clerk. Long-held tracts around Glenrock may go back through many deeds, and a title company can sort it out if money is changing hands.
Questions about the Douglas zoning map
Is zoning on the county parcel viewer near Rolling Hills?
Usually, a zoning layer may be in the Converse County parcel viewer layer list, though it may not be current.
Can I get an exception to a setback near Lost Springs?
For most people, boards in Douglas grant variances only when strict rules cause a real hardship; neighbors get notice.
Is land outside Douglas zoned?
For most people, county rules near Lost Springs vary.
What does a rezoning in Douglas involve?
Rezoning in the town usually takes weeks to months around Rolling Hills.
What's the tax parcel number used for near Glenrock?
Every office uses it to pull the same file for land near Glenrock; copy it before you call anyone.
Open the official Converse County, WY parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.