Blog · October 14, 2026 · Wisconsin
Reading the Greenville Zoning Map before you build or buy
Zoning decides what can be built where, and the answer for a lot near Combined Locks starts with the right map.
Main page: Outagamie County, WI GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
If you have a specific use in mind for land near Shiocton, check the Greenville zoning map before anything else: a district label decides setbacks, lot size and uses. In this Greenville guide: which office sets the rules for a lot, how to match a parcel to its district, and the questions that save a wasted trip.
Reading the Greenville zoning map for one lot
Within municipal limits, the local government adopts its own zoning map, so a lot in Greenville follows that code. Outside those limits, near Shiocton or Kimberly, county rules apply where they exist; ask the county planning office to be sure. The quickest way to tell which applies: look for a city limits layer in the Outagamie County ArcGIS parcel map.
Getting to the right map
Go first to the Outagamie County ArcGIS parcel map; it covers each tax parcel from Kimberly to Combined Locks. Out toward Combined Locks, type a street address, an owner's name or a parcel number, and the viewer zooms to the match. For a home near Little Chute, a pop-up or side panel typically gives the owner of record, acreage on the tax roll, the parcel number and sometimes recent sales.
Zoning is only step one
Once zoning clears a project near Kimberly, you still need building permits and inspections; health and road departments may weigh in on land near Combined Locks.
Which office to call
Questions about value or the owner field for land near Shiocton belong with the county real property listing office, which maintains the tax roll. Questions about what you can build around Hortonville need the planning or permitting office, town or county, depending on location.
City limits and county records
Greenville sits in Outagamie County, Wisconsin, which means parcel data comes from the county. On ground around Shiocton, city or town hall handles matters such as zoning, permits and utilities within town limits, and the county still keeps the parcel and deed records. Lots just outside the city limits out by Shiocton generally follows county rules, not municipal ones.
Finding a parcel's zoning district
Look up the lot on the Outagamie County ArcGIS parcel map first, copy its parcel ID, and use it when you ask the planning office near Combined Locks. For property near Kimberly, district codes like R-1, C-2 or A-1 point to a table of rules in the ordinance; the letters vary from place to place.
What the district controls
For a building plan near Kimberly, check minimum lot size, setbacks from each line, height limits and lot coverage. For land near Kimberly, overlays, whether historic, floodplain or corridor, can add rules on top of the base district.
Questions for the planning office
Have the parcel ID ready and describe the plan for the lot near Hortonville; staff can point to the right section of the ordinance. Ask whether a parcel near Hortonville meets current minimum size, because nonconforming lots can carry limits.
Next door to this county around Dale.
Outagamie County touches Brown County, Calumet County, Shawano County, Waupaca County, and Winnebago County; every one of them runs a separate parcel map. Ground near Hortonville that runs to the line can show up in two county records, so check the neighboring map too. For acreage around Hortonville, the Platbookmapper state page links each neighboring county map across Wisconsin.
On site with the map
Most viewers work in a phone browser, useful out on a road near Combined Locks, though signal can drop in rural spots. A printout of the tract near Combined Locks is a good backup.
What the map can't tell you
The acreage figure is an assessed number; just a licensed surveyor establishes the real lines for a parcel near Hortonville. For a home near Hortonville, owner names and values update on a schedule, so a deed recorded last month might lag behind.
Getting your bearings
Appleton is the county seat, where most land records are kept. You'll also find Hortonville, Dale, Kimberly, and Shiocton. About 193,234 people live in Outagamie County (Census Bureau estimate, 2023) across about 638 square miles. The county was formed in 1852, which matters when you trace an old farm's title for land near Little Chute.
Changing what's allowed
For a tract near Hortonville, most of these involve time, so budget weeks or months before you close.
Quick answers
Is land outside Greenville zoned?
County rules near Combined Locks vary; confirm with the county office.
Is zoning on the Outagamie County ArcGIS parcel map?
A zoning layer may be in the Outagamie County ArcGIS parcel map layer list, though it may not be current.
How do I find the zoning for a lot in Greenville?
Good question; find the parcel near Hortonville on the county ArcGIS parcel map, confirm whether it's inside Greenville limits, then ask that planning office for the district; staff can confirm by phone or email.
What are setbacks in Greenville?
It depends, but the district rules for Greenville list front, side and rear setbacks; planning staff can confirm for your lot.
Which office handles records for land near Dale?
For land near Combined Locks, assessment goes to the county real property listing office and deeds to the Register of Deeds.
Open the official Outagamie County, WI parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.