Blog · October 14, 2026 · Texas
Using the Joshua Flood Zone Map
Flood zones are set by FEMA, and checking one near Briaroaks takes a few minutes.
Main page: Johnson County, TX GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before an offer near Keene, pull up the Joshua flood zone map: a mapped flood zone changes insurance, building rules and resale. What this Joshua guide covers: locating a parcel on FEMA's map, decoding A, AE and X, and pairing it with the Johnson CAD map.
The Joshua flood zone map: start here
Flood zones come from FEMA's Flood Map Service Center: type an address near Cleburne, and pick the FIRMette or map view. A tract near Godley without an address can still be found: zoom in from Interstate 35W and click inside the land.
Opening the official parcel viewer
Your first stop is the Johnson CAD map; it maps each tax parcel in the county, Keene included. If you only know roughly where the land is, pan along Interstate 35W and click the parcel itself. For a tract near Cleburne, the parcel card typically gives the owner of record, assessed acreage, a parcel ID and sometimes recent sales.
City limits and county records
Joshua lies within Johnson County, Texas, which means parcel data comes from the county. In and around Godley, the municipality handles things like zoning, permits and utilities within town limits, and the county still keeps the parcel and deed records. Lots just outside the city limits toward Cleburne often answers to county rules rather than the town's.
How land is described here
Older tracts around Cleburne commonly use metes-and-bounds descriptions, listing bearings, distances and landmarks. Platted lots around Burleson are typically described by lot and block, which is simpler to follow. Write down the legal description for the tract near Burleson when you talk to a surveyor.
A short flood checklist
Ask the seller about past flood claims on the property near Burleson; an insurance quote early keeps the budget honest.
Places you'll see on the map
Cleburne is the county seat, where most land records are kept. You'll also find Cross Timber, Burleson, Briaroaks, and Keene, each with its own cluster of lots. About 202,906 people call Johnson County home (Census estimate, 2023) spread over some 725 square miles. Johnson County was formed in 1854, so old deeds can run back a long way.
Zones on the Joshua flood zone map
For a tract near Cross Timber, zones beginning with A or V mark the Special Flood Hazard Area, meaning a 1% or greater chance of flooding each year. If the land is near Cleburne, shaded Zone X marks moderate flood hazard, between the 1% and 0.2% annual chance floods; unshaded X means minimal mapped risk.
Neighboring parcel maps
Johnson County meets Bosque County, Ellis County, Hill County, Hood County, and Parker County, and each of those keeps its own parcel map. Ground near Briaroaks that runs to the line may be split in two county records, so look at the adjacent map as well. For a tract near Briaroaks, our state page links every bordering county map for Texas.
Field tips
Most viewers work in a phone browser, useful out on a road near Cleburne, but coverage can be spotty out of town. A printout of the tract near Keene helps when you meet an owner or agent.
Use the county map alongside FEMA
FEMA doesn't draw property lines, so check the Johnson CAD map too for the outline of the tract near Godley.
What the map can't tell you
Acreage on the record is an estimate; only a licensed surveyor sets the real boundary for a parcel near Briaroaks. For a home near Briaroaks, records update in batches, so a deed recorded last month might lag behind.
Water near Keene
Small streams around Cross Timber aren't always studied in detail, so ask neighbors about past flooding. Wetlands near Keene can limit building even outside a flood zone; check the National Wetlands Inventory mapper for a first look.
Who handles what
For assessment questions about property around Briaroaks are handled by the appraisal district, the office behind the parcel record. Zoning, permits and septic questions near Briaroaks need the planning or permitting office, and the answer depends on jurisdiction.
What a flood zone means for a buyer
If the land is near Keene, an Elevation Certificate from a surveyor helps: it compares the building to the BFE. Building or adding on near Godley in a mapped zone often needs a floodplain permit; check with the county or town building office early.
Frequently asked
What is a base flood elevation around Cross Timber?
Generally, the base flood elevation is the water level expected in the 1% annual chance flood; surveyors near Keene use it often.
Do I need to worry about flooding in Zone X for land near Keene?
It depends, but X zones around Cleburne are lower risk, not no risk, and floods still happen outside high-risk zones.
When is flood insurance required near Burleson?
For most people, for a building near Cross Timber in an A or V zone with a federally backed or regulated mortgage, it's generally required; outside those zones it's your call.
Can I challenge a flood zone near Briaroaks?
Good question; FEMA's LOMA process is the usual route when a building near Briaroaks sits above the base flood elevation; it starts with an elevation survey.
Is the parcel map a survey near Godley?
The map near Keene is approximate, so a fence may sit off the line
Open the official Johnson County, TX parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.