Platbookmapper County GIS Directory

Blog · October 14, 2026 · Arkansas

Morrilton Zoning Map, Arkansas: what to check

Zoning decides what can be built where, and the answer for a lot near Menifee starts with the right map.

VIEW PLATBOOK MAPPER

A recorded plat sheet spread on a table

Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.

Ahead of any building plan near Menifee, check the Morrilton zoning map first: a district label decides setbacks, lot size and uses. This Morrilton guide covers: which office sets the rules for a lot, matching a lot to its zoning district, and when a variance or rezoning comes up.

The Morrilton zoning map: start here

Within municipal limits, the local government adopts its own zoning map, so a lot in Morrilton is governed there. Past the city line, around Plumerville, the county may have its own zoning, or none at all; ask the county planning office to be sure. To find out which side of the line a parcel is on: look for a city limits layer in the Conway County ArcGIS parcel map.

Pulling up a parcel

Property in and around Menifee can be looked up on the Conway County ArcGIS parcel map, which opens without registering. In and around Oppelo, type a street address, an owner's name or a parcel number, then pick the result to center the map on it. In and around Menifee, the parcel card usually lists the owner of record, acreage on the tax roll, the parcel number and often a sale date.

Morrilton, AR: the basics

Morrilton is part of Conway County, Arkansas, and the county assessor maps its lots. Morrilton is also the county seat, which puts the Circuit Clerk close by. For a tract near Oppelo, city or town hall handles matters such as zoning, permits and utilities inside its limits, while the county keeps the tax map. Lots just outside the town limits out by Plumerville usually follows county rules instead.

Who handles what

Deeds, mortgages and recorded plats for land near Menifee are with the Circuit Clerk, often with an online index. Building or septic questions for a lot near Plumerville are for the local planning and health departments, and the answer depends on jurisdiction.

Backing up the map with records

Before you sign anything, get the recorded deed through the Circuit Clerk; the parcel map near Menifee only summarizes it. For a parcel near Menifee, use the document number from the tax record to skip a name search.

How to look up the district

Pull the parcel up on the Conway County ArcGIS parcel map, note the parcel number, and match it to the adopted zoning map. For acreage around Menifee, district codes like R-1, C-2 or A-1 point to a table of rules in the ordinance; the letters vary from place to place.

Rules tied to a district

In and around Menifee, the ordinance spells out uses allowed by right, uses needing a permit, and uses not allowed. For a tract near Oppelo, overlay districts, whether historic, floodplain or corridor, may apply even when the base zoning looks simple.

A word on accuracy

Parcel lines are drawn for taxes, not surveyed, so a fence near Oppelo often sits some distance off the line on screen. Near Oppelo, owner names and values update on a schedule, so a deed recorded last month might lag behind.

What to ask before you buy

When you call about land near Menifee, give the parcel number and your intended use; ask what's allowed by right and what needs a permit. Also ask whether the lot near Menifee is a legal lot of record, since some older splits don't.

Permits after zoning

Even when zoning allows a use near Plumerville, you still need building permits and inspections; septic or sewer and driveway access are often reviewed too.

Next door to Conway County

Conway County meets Faulkner County, Perry County, Pope County, Van Buren County, and Yell County; every one of them runs a separate parcel map. A tract near the line by Oppelo may show up across two assessors' files, so check the adjacent map before you assume the acreage. For a home near Menifee, the Platbookmapper state page lists each neighboring county map for Arkansas.

Arkansas follows the Public Land Survey System, which means a tract near Plumerville is described by section, township and range. Each section is nominally a mile square, about 640 acres, with 36 sections to a township, though real sections near Oppelo vary in size. Write down the legal description for the tract near Menifee before you request a deed or survey.

Asking for an exception

When a project near Plumerville falls outside the rules, the usual routes are a variance, a special use permit or a rezoning.

Frequently asked

How far from the property line can I build in Morrilton?

It depends, but the district rules for Morrilton list front, side and rear setbacks; planning staff can confirm for your lot.

How can I look up zoning in Morrilton?

Find the parcel near Oppelo on the Conway County ArcGIS parcel map, confirm whether it's inside this town limits, then ask that planning office for the district.

Can I get an exception to a setback near Menifee?

Good question; boards in Morrilton grant variances only when strict rules cause a real hardship.

Does the county zone rural land near Menifee?

In most cases, county rules near Oppelo vary, so ask the county planning office.

Is there an app for the parcel map near Oppelo?

For a parcel near Menifee, most viewers run in a mobile browser; screenshots help offline.

Open the official Conway County, AR parcel map See it in the Platbookmapper directory

Related

← All posts · Open the map