Blog · October 14, 2026 · Texas
Plainview Flood Zone Map: checking a property's flood zone
Flood zones are set by FEMA, and checking one near Hale Center takes a few minutes.
Main page: Hale County, TX GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Ahead of any purchase around Edmonson, check the Plainview flood zone map: the zone on that map shapes insurance, building rules and resale. In this Plainview guide: finding the address on FEMA's map, reading the zone codes, and pairing it with the Hale CAD interactive map.
Getting started with the Plainview flood zone map
Start with FEMA's Flood Map Service Center: search an address around Edmonson, and choose the dynamic map. Vacant ground around Edmonson can still be found: search the nearest road then click the parcel area.
Opening the official parcel viewer
Go first to the Hale CAD interactive map; it maps each tax parcel in the county, Edmonson included. If the land is near Petersburg, put in a street address, an owner's name or a parcel number, and the matching parcel lights up. Out toward Petersburg, a pop-up or side panel usually lists the owner of record, acreage on the tax roll, the parcel number and often a sale date.
Limits of the parcel data
Listed acreage is an assessed number; only a licensed surveyor establishes the real boundary for a parcel near Abernathy. Records update in batches, so a fresh transfer around Edmonson may not show yet.
Plainview, TX: the basics
Plainview lies within Hale County, Texas, and the county assessor maps its lots. As the county seat, Plainview hosts the courthouse, which puts the County Clerk close by. In and around Edmonson, city or town hall handles things like zoning, permits and utilities for lots inside the boundary, while the county keeps the tax map. Lots just outside the town limits toward Petersburg often follows county rules rather than the town's.
Neighboring parcel maps
Hale County borders Castro County, Crosby County, Floyd County, Hockley County, and Lamb County, and each of those keeps its own parcel map. Ground near Petersburg that runs to the line may show up in two county records, so look at the neighboring map as well. For acreage around Hale Center, our state page lists each bordering county map across Texas.
Deeds, plats and who keeps them
The map is an index, not the title: recorded deeds, plats and easements for land near Hale Center are kept by the County Clerk. Inherited tracts around Edmonson can go back through many deeds, so a title company earns its fee on a real sale.
Decoding the flood zone labels
An AE label carries a published BFE, which plain A zones lack; builders around Edmonson design to it. Near Petersburg, shaded Zone X marks moderate flood hazard, between the 1% and 0.2% annual chance floods; unshaded X is minimal risk.
Reading the legal description
Older tracts around Abernathy commonly use metes-and-bounds descriptions, which trace the boundary call by call. Subdivision lots in Edmonson refer to a recorded plat, which is simpler to follow. Copy the legal description from the record for the parcel near Petersburg when you talk to a surveyor.
Use the county map alongside FEMA
FEMA doesn't draw property lines, so pair it with the Hale CAD interactive map to see exactly which lot near Edmonson you're looking at.
Beyond the mapped zones
Creeks and ditches near Edmonson aren't always studied in detail, so walk the land after rain. Wetlands near Hale Center can limit building even outside a flood zone; the National Wetlands Inventory mapper shows mapped wetlands.
Questions to ask before you buy
Ask the listing agent for any Elevation Certificate on the property near Petersburg; an insurance quote early keeps the budget honest.
Which office to call
If the acreage or value on a parcel near Edmonson looks off are handled by the appraisal district, which maintains the tax roll. Building or septic questions for a lot near Edmonson go to planning, building or health offices, and the answer depends on jurisdiction.
Lenders and permits
On ground around Hale Center, ask for an Elevation Certificate: it records the building's elevation against the base flood. New construction in a floodplain near Hale Center usually means extra permit review; check with the county or town building office before you plan.
Using it on a phone
The parcel map usually runs in a mobile browser, which helps when you're standing on land near Abernathy, but coverage can be spotty out of town. A screenshot of the parcel near Petersburg with its ID helps when you meet an owner or agent.
Frequently asked
What is a LOMA near Hale Center?
Good question; FEMA's LOMA process is the usual route when a building near Edmonson sits above the base flood elevation; a surveyor's elevation data supports it.
What is a base flood elevation in Plainview?
The base flood elevation is the water level expected in the 1% annual chance flood; surveyors near Petersburg use it often.
Do I need to worry about flooding in Zone X near Abernathy?
Usually, Zone X near Petersburg means moderate (shaded) or minimal (unshaded) mapped risk, and floods still happen outside high-risk zones.
How often are flood maps updated for land near Hale Center?
It depends, but a new study can move a zone line near Abernathy; your community is notified before changes take effect.
Can I use the viewer in the field near Edmonson?
The map near Hale Center usually works on a phone, though rural signal can drop.
Open the official Hale County, TX parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.