Blog · October 14, 2026 · Washington
Port Angeles Zoning Map: finding the district for a lot
Zoning decides what can be built where, and the answer for a lot near Forks starts with the right map.
Main page: Clallam County, WA GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
If you have a specific use in mind for land near Sequim, check the Port Angeles zoning map first: a district label can make or break the plan. What this Port Angeles guide covers: which office sets the rules for a lot, how to match a parcel to its district, and the questions that save a wasted trip.
The Port Angeles zoning map: start here
Within municipal limits, the local government adopts its own zoning map, which means a parcel in Port Angeles answers to that map. For rural land toward Sequim, the county's ordinance, if any, takes over; ask the county planning office to be sure. A fast way to settle it: look for a city limits layer in the Washington Current Parcels layer in ArcGIS Map Viewer.
Getting to the right map
Parcels around Sequim can be looked up on the Washington Current Parcels layer in ArcGIS Map Viewer, free to use and open without a login. For acreage around Forks, put in a street address, an owner's name or a parcel number, and the matching parcel lights up. For a tract near Forks, a pop-up or side panel normally shows the owner of record, assessed acreage, the parcel number and in many cases the last transfer.
Port Angeles and the county around it
Port Angeles lies within Clallam County, Washington, which means parcel data comes from the county. As the county seat, Port Angeles hosts the courthouse, which puts the County Auditor close by. If the land is near Forks, the municipality handles things like zoning, permits and utilities for lots inside the boundary, and the county still keeps the parcel and deed records. Acreage past the city limits out by Sequim generally falls under county rules instead.
Finding a parcel's zoning district
Pull the parcel up on the Washington Current Parcels layer in ArcGIS Map Viewer, copy its parcel ID, then compare it to the zoning map from the office covering Port Angeles. For a home near Forks, district codes like R-1, C-2 or A-1 aren't self-explanatory, so read the ordinance chapter for each; the letters vary from place to place.
Questions for the planning office
When you call about land near Sequim, give the parcel number and your intended use; staff can point to the right section of the ordinance. Ask whether a parcel near Sequim meets current minimum size, because nonconforming lots can carry limits.
Reading the ordinance
For a building plan near Forks, look up setbacks, height and how much of the lot can be covered. For a home near Sequim, overlays, whether historic, floodplain or corridor, can add rules on top of the base district.
Changing what's allowed
If the land is near Sequim, most of these involve time, so budget weeks or months before you close.
When a parcel crosses a boundary
Clallam County touches Jefferson County and San Juan County, and each of those keeps its own parcel map. Ground near Forks that runs to the line may show up in two county records, so look at the adjacent map as well. Out toward Forks, the Platbookmapper state page links every neighboring county map for Washington.
Building permits and inspections
Once zoning clears a project near Forks, you still need building permits and inspections; health and road departments may weigh in on land there.
Clallam County in a few facts
Port Angeles is the county seat, home to the main records offices. You'll also find Sequim and Forks. About 77,616 people call Clallam County home (Census Bureau estimate, 2023) across some 1,739 square miles. Clallam County dates to 1854, so old deeds can run back a long way. Features like Dungeness National Wildlife Refuge are easy to spot when you zoom out from Forks.
How land is described here
Washington follows the Public Land Survey System, so rural legal descriptions near Sequim cite section, township and range. A standard section is about one square mile, roughly 640 acres, and a township holds 36 of them, though sections near Sequim can be irregular. Keep the legal description for land near Sequim when you talk to a surveyor.
On site with the map
Most viewers work in a phone browser, useful out on a road near Forks, but coverage can be spotty out of town. A saved image of the lot near Sequim and its lines keeps working without signal.
Questions about the Port Angeles zoning map
Does the county zone rural land near Sequim?
Good question; county rules near Forks vary.
What are setbacks near Sequim?
Short answer: setbacks near Sequim depend on the zoning district; the ordinance has the numbers.
Where is the Port Angeles zoning map?
Generally, find the parcel near Sequim on the Washington Current Parcels layer in ArcGIS Map Viewer, confirm whether it's inside this town limits, then ask that planning office for the district; staff can confirm by phone or email.
Can I get an exception to a setback near Sequim?
For most people, boards in Port Angeles grant variances only when strict rules cause a real hardship.
Is the parcel map a survey around Sequim?
The map near Forks is approximate; a survey sets the real corners
Open the official Clallam County, WA parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.