Blog · October 14, 2026 · Minnesota
Using the Redwood County Flood Zone Map
The zone on FEMA's map affects insurance, building and resale near Redwood Falls.
Main page: Redwood County, MN GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before you buy or build near Gilfillan, check the Redwood County flood zone map: the zone on that map shapes insurance, building rules and resale. What this county guide covers: locating a parcel on FEMA's map, decoding A, AE and X, and pairing it with the county Beacon site, especially near Gilfillan.
Checking the Redwood County flood zone map step by step
If the land is near Lucan, start with FEMA's Flood Map Service Center: enter the street address, and pick the FIRMette or map view. A tract near Clements without an address can still be found: pan from the closest town then click the parcel area.
Pulling up a parcel
Lots and tracts near Redwood Falls are published on the Redwood County Beacon site, free to use and open without a login. When a rural tract has no street number, follow the nearest road on the aerial until the lines appear, then click inside the one you want, which applies near Redwood Falls as much as anywhere. For property near Milroy, the parcel card typically gives the owner of record, assessed acreage, the parcel number and sometimes recent sales.
Decoding the flood zone labels
If the land is near Milroy, any A or V zone are Special Flood Hazard Areas, which FEMA defines as a 1% annual chance of flooding. For a tract near Redwood Falls, shaded Zone X marks moderate flood hazard, between the 1% and 0.2% annual chance floods; unshaded X means minimal mapped risk.
Where the recorded documents are
For a parcel near Lamberton, the map is an index, not the title: recorded deeds, plats and easements for parcels in the county are filed with the County Recorder. If you're looking near Clements, bring the instrument number shown in the record panel to skip a name search.
Places you'll see on the map
Redwood Falls holds the county offices, which is where the courthouse records live. Smaller places on the map include Belview, Clements, Delhi, and Lamberton, each with its own cluster of lots. Around 15,288 people live in Redwood County (Census Bureau estimate, 2023) on roughly 879 square miles. Redwood County was formed in 1862, which matters when you trace an old farm's title.
Use the county map alongside FEMA
FEMA's map shows zones but not ownership, so open the Redwood County Beacon site next to see exactly which lot near Clements you're looking at.
On site with the map
The parcel map usually runs in a mobile browser, which helps when you're standing on land near Redwood Falls, though signal can drop in rural spots. A saved image of the lot near Belview and its lines helps when you meet an owner or agent.
A short flood checklist
For acreage around Milroy, request for any Elevation Certificate before closing; getting a quote early avoids surprises.
Money questions tied to the zone
For a tract near Redwood Falls, an Elevation Certificate from a surveyor helps: it can change the insurance price a lot. Remodeling a house in a zone near Clements usually means extra permit review; check with the county or town building office before you plan.
Next door to Redwood County
Redwood County borders Brown County, Cottonwood County, Lyon County, Murray County, and Renville County, and each of those keeps its own parcel map. Ground near Lucan that runs to the line can be split in two county records, so open the neighboring map as well. Near Lucan, the Platbookmapper state page lists every bordering county map across Minnesota.
Which office to call
Deeds, mortgages and recorded plats for land near Delhi are with the County Recorder, usually searchable by name or document number. Zoning, permits and septic questions near Belview are for the local planning and health departments, and the answer depends on jurisdiction.
How land is described here
Minnesota follows the Public Land Survey System, which means a tract near Rowena is described by section, township and range. A standard section is about one square mile, roughly 640 acres, with 36 sections to a township, though sections near Rowena can be irregular. Copy the legal description from the record for the parcel near Lucan when you talk to a surveyor.
Beyond the mapped zones
Creeks and ditches near Rowena may not have detailed mapping, so walk the land after rain. Wetlands near Redwood Falls can limit building even outside a flood zone; the National Wetlands Inventory mapper shows mapped wetlands.
Redwood County: common questions
Do I need to worry about flooding in Zone X near Milroy?
Short answer: shaded X is moderate risk and unshaded X is minimal risk; many owners near Rowena buy coverage anyway.
Is AE a high-risk flood zone around Redwood Falls?
It depends, but both are high-risk zones, but only AE has a base flood elevation, so builders near Rowena design to that elevation.
How do I get a property removed from a flood zone around Lamberton?
If the land is near Belview, a Letter of Map Amendment (LOMA) from FEMA can remove a structure on naturally high ground; it starts with an elevation survey.
Is my property near Delhi in a flood zone?
Search the address near Delhi on FEMA's Flood Map Service Center, which takes a couple of minutes.
How do I save a parcel from the viewer around Clements?
With a lot near Redwood Falls, use the print button or a screenshot; downloads of raw data vary by county.
Open the official Redwood County, MN parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.