Blog · October 14, 2026 · Utah
Using the Richfield Zoning Map
A parcel's zoning district shapes building, splitting and business use near Glenwood.
Main page: Sevier County, UT GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Ahead of any building plan near Annabella, check the Richfield zoning map early: the zoning district can make or break the plan. This town guide covers: which office sets the rules for a lot, matching a lot to its zoning district, and what to ask the planning staff, at least around Monroe.
Which office controls the Richfield zoning map
Within municipal limits, zoning usually comes from the municipality, which means a parcel in Richfield follows that code. Outside those limits, near Monroe or Annabella, the county may have its own zoning, or none at all; the county planning or zoning office can confirm. A fast way to settle it: check the municipal limits layer on the Utah State Parcels viewer.
The free map to start with
Parcels around Central Valley can be looked up on the Utah State Parcels viewer, which opens without registering. Without an address in hand, pan along US Route 50 and click the parcel itself. Near Sigurd, a pop-up or side panel normally shows the owner of record, assessed acreage, a parcel ID and in many cases the last transfer.
Richfield, UT: the basics
Richfield sits in Sevier County, Utah, so its parcels are on the county's map. Richfield is also the county seat, handy when you need recorded documents. For land near Monroe, city or town hall handles things like zoning, permits and utilities within town limits, but the county runs assessment and recording. Lots just outside the town limits toward Monroe generally follows county rules instead.
Questions for the planning office
Have the parcel ID ready and describe the plan for the lot near Glenwood; ask what's allowed by right and what needs a permit. Ask whether a parcel near Sigurd meets current minimum size, because nonconforming lots can carry limits.
Finding a parcel's zoning district
Pull the parcel up on the Utah State Parcels viewer, note the parcel number, and match it to the adopted zoning map. Near Annabella, district codes like R-1, C-2 or A-1 point to a table of rules in the ordinance; don't assume a code means the same thing everywhere.
Before you lean on the lines
Acreage on the record is an estimate; just a licensed surveyor can set the real corners on land around Central Valley. Records update in batches, so a fresh transfer around Annabella might lag behind.
What the district controls
If you're looking near Annabella, the ordinance spells out uses allowed by right, uses needing a permit, and uses not allowed. Near Glenwood, overlay districts, whether historic, floodplain or corridor, can add rules on top of the base district.
Building permits and inspections
Even when zoning allows a use near Elsinore, you still need building permits and inspections; septic or sewer and driveway access are often reviewed too.
Recorded documents worth pulling
For anything that matters, pull the recorded deed from the County Recorder; the parcel map near Elsinore only summarizes it. With a lot near Glenwood, have ready the instrument number listed on the parcel record so staff can find the deed fast.
Taking the map into the field
Most viewers work in a phone browser, useful out on a road near Elsinore, so load it before you lose signal. A saved image of the lot near Elsinore and its lines is a good backup.
Asking for an exception
For property near Central Valley, expect an application, a fee, notice to neighbors and a public hearing.
Reading the legal description
Utah is laid out under the Public Land Survey System, so deeds around Sigurd reference sections and townships. Each section is nominally a mile square, about 640 acres, and a township holds 36 of them, though corrections make some sections near Monroe odd-sized. Write down the legal description for the tract near Sigurd before you request a deed or survey.
Offices that can help
Questions about value or the owner field for land near Sigurd are handled by the County Assessor, since that office keeps the assessment data. Building or septic questions for a lot near Elsinore need the planning or permitting office, and the answer depends on jurisdiction.
When a parcel crosses a boundary
Sevier County borders Beaver County, Emery County, Millard County, Piute County, and Sanpete County, and each of those keeps its own parcel map. Ground near Sigurd that runs to the line may show up in two county records, so check the neighboring map before you assume the acreage. The Platbookmapper state page lists every neighboring county map across Utah.
Richfield: common questions
Where do I find setback rules near Annabella?
For most people, the district rules for Richfield list front, side and rear setbacks; the ordinance has the numbers.
Is land outside this town zoned near Aurora?
Good question; land beyond Richfield limits usually follows county rules, if any.
Where is the Richfield zoning map?
It depends, but find the parcel near Monroe on the Utah State Parcels viewer, confirm whether it's inside the town limits, then ask that planning office for the district.
Can I run a business from home in Richfield?
In most cases, home businesses in Richfield are often allowed with conditions; the ordinance lists the details.
Does the parcel map work on a phone around Central Valley?
Closer to Annabella, most viewers run in a mobile browser; screenshots help offline.
Open the official Sevier County, UT parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.