Blog · October 14, 2026 · Missouri
Eureka Plat Map: finding the recorded plat
A recorded plat shows how land near Winchester was divided into lots.
Main page: St. Louis County, MO GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Buying a lot in a subdivision near Ellisville? Start with the Eureka plat map, since it shows lots, streets and easements as approved. This Eureka guide covers: where to request a copy, how a plat differs from a parcel map, and what to look for on the sheet.
Who keeps the Eureka plat map
For a lot in Eureka, look for the plat book reference on the parcel record; that makes the request quick.
The viewer St. Louis County publishes
Lots and tracts near Winchester are published on the St. Louis County ArcGIS parcel map, free to use and open without a login. For a home near Wildwood, put in a street address, an owner's name or a parcel number, and the matching parcel lights up. Closer to Valley Park, the record panel typically gives the owner of record, assessed acreage, a parcel ID and often a sale date.
City limits and county records
Eureka sits in St. Louis County, Missouri, so its parcels are on the county's map. For a home near Ballwin, the municipality handles matters such as zoning, permits and utilities inside its limits, and the county still keeps the parcel and deed records. Lots just outside the city limits out by Winchester usually falls under county rules rather than the town's.
Replats and vacations
An amended plat may change lots around Wildwood, so check for later filings; vacated streets or alleys also get recorded.
Limits of the parcel data
The acreage figure is an estimate; only a licensed surveyor can set the real lines on land around Wildwood. In and around Ellisville, records update in batches, so a deed recorded last month can take weeks to appear.
Reading the legal description
Missouri is laid out under the Public Land Survey System, so rural legal descriptions near Winchester cite section, township and range. A standard section is about one square mile, roughly 640 acres, and a township holds 36 of them, though corrections make some sections near Wildwood odd-sized. Keep the legal description for land near Wildwood before you request a deed or survey.
How a plat differs from the tax map
Where lines don't match in Eureka, trust the recorded documents over the GIS layer.
Using it on a phone
The parcel map usually runs in a mobile browser, handy when you're parked on a road near Wildwood, but coverage can be spotty out of town. A screenshot of the parcel near Wildwood with its ID helps when you meet an owner or agent.
Lots, blocks and easements
Easements on the plat near Pacific stay with the land when it sells; check the plat notes and any covenants.
Requesting the plat
If the land is near Ballwin, some counties put plat images online, while others require a visit or a request; small fees are common.
Who handles what
If the acreage or value on a parcel near Ballwin looks off are handled by the County Assessor, which maintains the tax roll. Questions about what you can build around Pacific go to planning, building or health offices, depending on whether the land is inside town limits.
The paper trail behind a parcel
The map is an index, not the title: deeds, subdivision plats and easements for land near Ellisville are kept by the Recorder of Deeds. For acreage around Ballwin, have ready the document number listed on the parcel record so staff can find the deed fast.
Metes and bounds instead
Rural land near Valley Park that was never subdivided is often described by metes and bounds or survey description; the deed and any recorded survey describe it instead.
Neighboring parcel maps
St. Louis County meets Madison County, IL, Monroe County, IL, St. Clair County, IL, Franklin County, and Jefferson County, and each of those keeps its own parcel map. Acreage along the edge near Pacific may be split in two county records, so look at the neighboring map before you assume the acreage. For a parcel near Ballwin, the Platbookmapper state page lists every neighboring county map for Missouri.
Places you'll see on the map
Clayton is the county seat, where most land records are kept. You'll also find Wildwood, Pacific, Ellisville, and Ballwin, each with its own cluster of lots. About 987,059 people call St. Louis County home (Census Bureau estimate, 2023) on roughly 508 square miles. St. Louis County was formed in 1812, which matters when you trace an old farm's title. Places such as Spanish Lake Park and Babler State Park are easy to spot when you zoom out from Ellisville.
Frequently asked
What is a lot and block description in Eureka?
In and around Valley Park, lot and block refer to a numbered lot within a block on a recorded subdivision plat, so pull that plat for dimensions.
Is a plat map a survey in Eureka?
For acreage around Wildwood, a recorded plat is based on a survey, but the GIS map is not; a surveyor ties it to the ground.
What is a replat near Ballwin?
Good question; combining or splitting lots near Pacific usually needs a recorded plat change, often with a surveyor's drawing.
Are old plats online near Ellisville?
In most cases, older plats near Winchester may be on film or paper, including older subdivisions.
Who do I call about a parcel near Valley Park?
The County Assessor handles values and the tax roll, and the Recorder of Deeds keeps deeds; planning offices cover zoning near Valley Park
Open the official St. Louis County, MO parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.