Blog · October 14, 2026 · Texas
Falls County Flood Zone Map: checking a property's flood zone
The zone on FEMA's map affects insurance, building and resale near Cego.
Main page: Falls County, TX GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before an offer near Barclay, check the Falls County flood zone map: the zone on that map shapes insurance, permits and resale. In this Falls County guide: locating a parcel on FEMA's map, decoding A, AE and X, and pairing it with the Falls CAD interactive map.
The Falls County flood zone map: start here
For land near Bruceville-Eddy, flood zones come from FEMA's Flood Map Service Center: enter the street address, and pick the FIRMette or map view. Rural land near Golinda with no street number can still be found: zoom in from the nearest road and click the spot.
The viewer Falls County publishes
Begin with the Falls CAD interactive map; it maps each assessed parcel around Barclay and Cego. If you only know roughly where the land is, follow the nearest road on the aerial and click the parcel itself, whether the land is near Bruceville-Eddy or elsewhere in the county. If you're looking near Golinda, the parcel card usually lists the owner of record, acreage on the tax roll, the parcel number and sometimes recent sales.
Who handles what
For assessment questions about property around Durango belong with the appraisal district, which maintains the tax roll. Questions about what you can build around Lott are for the local planning and health departments, town or county, depending on location.
Zones on the Falls County flood zone map
For property near Rosebud, A and V zones are Special Flood Hazard Areas, land with a 1-percent chance of flooding in any year. If the land is near Bruceville-Eddy, a shaded X area is moderate risk, between the 1% and 0.2% annual chance floods; plain X, or C on older maps, means minimal mapped risk.
Use the county map alongside FEMA
FEMA's map shows zones but not ownership, so pair it with the Falls CAD interactive map to see exactly which lot near Golinda you're looking at.
Field tips
Most viewers work in a phone browser, handy when you're parked on a road near Golinda, though signal can drop in rural spots. A saved image of the lot near Golinda and its lines keeps working without signal.
What to request from a seller
For a tract near Cedar Springs, ask the seller about past flood claims before closing; an insurance quote early keeps the budget honest.
Legal descriptions in Texas
Older tracts around Lott are often described by metes and bounds, a series of courses and distances from a starting point. Subdivision lots in Golinda usually use lot and block from a recorded plat instead, making them easier to find. Write down the legal description for the tract near Marlin before you request a deed or survey.
Limits of the parcel data
For a home near Marlin, the acreage figure is a tax-roll number; just a licensed surveyor can set the real corners on the ground. Around Golinda, records update in batches, so a deed recorded last month can take weeks to appear.
Money questions tied to the zone
For property near Marlin, get the Elevation Certificate if one exists: it can change the insurance price a lot. Remodeling a house in a zone near Lott usually means extra permit review; check with the county or town building office before you plan.
Low spots and local drainage
Low-lying fields near Chilton may not have detailed mapping, so walk the land after rain. Wet ground around Cedar Springs is a separate issue from flood zones; the National Wetlands Inventory mapper shows mapped wetlands.
Recorded documents worth pulling
For anything that matters, get the recorded deed through the County Clerk; the parcel line is a drawing of it, which applies near Cedar Springs as much as anywhere. Closer to Barclay, bring the instrument number listed on the parcel record to skip a name search.
Neighboring parcel maps
Falls County meets Bell County, Limestone County, McLennan County, Milam County, and Robertson County, and each of those keeps its own parcel map. Ground near Barclay that runs to the line can be split in two county records, so look at the neighboring map as well. On ground around Barclay, the Platbookmapper state page lists each neighboring county map for Texas.
Questions about the Falls County flood zone map
What is a base flood elevation for land near Lott?
In and around Bruceville-Eddy, the BFE is printed in AE zones on FEMA's map; local rules may require building above it.
Can I see flood zones on the Falls CAD interactive map near Chilton?
Good question; a flood layer may appear in the Falls CAD interactive map layer list; confirm a lot near Lott on FEMA's map either way.
How do I get a property removed from a flood zone in Falls County?
With a lot near Chilton, a Letter of Map Amendment (LOMA) from FEMA can remove a structure on naturally high ground; a surveyor's elevation data supports it.
Is Zone X safe from flooding around Marlin?
Closer to Golinda, shaded X is moderate risk and unshaded X is minimal risk; FEMA notes that a large share of claims come from these areas.
Can I use the viewer in the field near Bruceville-Eddy?
No app is needed for most county viewers; load it before you lose coverage near Rosebud.
Open the official Falls County, TX parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.