Blog · October 14, 2026 · Missouri
Fulton Flood Zone Map: checking a property's flood zone
Flood zones are set by FEMA, and checking one near Kingdom City takes a few minutes.
Main page: Callaway County, MO GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before an offer near New Bloomfield, look at the Fulton flood zone map: the zone on that map shapes insurance, permits and resale. What this Fulton guide covers: locating a parcel on FEMA's map, decoding A, AE and X, and pairing it with the Callaway County ArcGIS parcel map.
The Fulton flood zone map: start here
Start with FEMA's Flood Map Service Center: type an address near Holts Summit, then open the map view for that panel. A tract near New Bloomfield without an address is still easy to locate: zoom in from the nearest road then click the parcel area.
The free map to start with
Your first stop is the Callaway County ArcGIS parcel map; it maps each assessed parcel around Mokane and Holts Summit. On ground around New Bloomfield, put in a street address, an owner's name or a parcel number, then pick the result to center the map on it. Near Kingdom City, the parcel card typically gives the owner of record, assessed acreage, the parcel number and often a sale date.
A short flood checklist
Request about past flood claims on the property near Mokane; an insurance quote early avoids surprises.
Where Fulton fits in
Fulton is part of Callaway County, Missouri, so its parcels are on the county's map. As the county seat, Fulton hosts the courthouse, so deeds and plats are filed in town. In and around Auxvasse, City or town hall handles things like zoning, permits and utilities for lots inside the boundary, and the county still keeps the parcel and deed records. Land beyond the town limits near Auxvasse usually follows county rules, not municipal ones.
Using it on a phone
The parcel map usually runs in a mobile browser, handy when you're parked on a road near Jefferson City, so load it before you lose signal. A saved image of the lot near Jefferson City and its lines keeps working without signal.
Reading A, AE and X
Closer to Kingdom City, zones beginning with A or V mark the Special Flood Hazard Area, meaning a 1% or greater chance of flooding each year. For a parcel near Mokane, a shaded X area marks moderate flood hazard, roughly the 100- to 500-year range; unshaded X means minimal mapped risk.
Limits of the parcel data
The acreage figure is an assessed number; only a licensed surveyor sets the real boundary on land around Kingdom City. Closer to Auxvasse, records update in batches, so a deed recorded last month can take weeks to appear.
How land is described here
Missouri uses the Public Land Survey System, which means a tract near Holts Summit is described by section, township and range. A standard section is about one square mile, roughly 640 acres, with 36 sections to a township, though real sections near Auxvasse vary in size. Keep the legal description for land near Auxvasse for any title or survey request.
Lining it up with the parcel map
FEMA doesn't draw property lines, so open the Callaway County ArcGIS parcel map next to confirm you have the right parcel near Kingdom City.
Getting answers from the right desk
For assessment questions about property around Mokane go to the County Assessor, since that office keeps the assessment data. Building or septic questions for a lot near New Bloomfield go to planning, building or health offices, depending on whether the land is inside town limits.
Recorded documents worth pulling
When the details count, get the recorded deed through the Recorder of Deeds; the parcel map near Kingdom City only summarizes it. Long-held tracts around Holts Summit can go back through a long string of deeds, and a title company is worth hiring on a real sale.
Money questions tied to the zone
Around Holts Summit, get the Elevation Certificate if one exists: it records the building's elevation against the base flood. Remodeling a house in a zone near Kingdom City usually means extra permit review; ask the local floodplain administrator before you plan.
Beyond the mapped zones
Small streams around Kingdom City aren't always studied in detail, so look for water marks and debris lines. Wetlands near Auxvasse can limit building even outside a flood zone; check the National Wetlands Inventory mapper for a first look.
Questions about the Fulton flood zone map
What is a LOMA around Holts Summit?
In most cases, you can ask FEMA for a LOMA if surveyed elevations show the building near Auxvasse is above the BFE; a surveyor's elevation data supports it.
Is Zone X safe from flooding for land near Holts Summit?
Zone X near Holts Summit means moderate (shaded) or minimal (unshaded) mapped risk; many owners near Mokane buy coverage anyway.
Is there a flood layer on the parcel viewer near Holts Summit?
For most people, a flood layer may appear in the Callaway County ArcGIS parcel map layer list, but FEMA's own map is the official source.
Is AE a high-risk flood zone around Kingdom City?
An AE zone has a 1% annual chance of flooding and a base flood elevation, which shapes building rules near New Bloomfield.
How do I save a parcel from the viewer around Jefferson City?
Some viewers offer PDF export; include the record panel for the lot near Holts Summit.
Open the official Callaway County, MO parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.