Blog · October 14, 2026 · North Carolina
Reading the Kannapolis Plat Map for a lot
A recorded plat shows how land near Midland was divided into lots.
Main page: Cabarrus County, NC GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Checking easements on a house in Kannapolis? Start with the Kannapolis plat map, as it records the lot layout that deeds refer to. This Kannapolis guide covers: where to request a copy, plat versus tax map, and what to look for on the sheet.
The Kannapolis plat map: start here
For a subdivision near Mount Pleasant, look for the plat book reference on the parcel record; that makes the request quick.
The free map to start with
Go first to the Cabarrus County parcel viewer; it covers every tax parcel in the county, Harrisburg included. Without an address in hand, zoom in from Harrisburg and select the outline. Out toward Mount Pleasant, write down the parcel ID before closing the panel; each office in the county uses it to find the file.
Kannapolis and the county around it
Kannapolis lies within Cabarrus County, North Carolina, which means parcel data comes from the county. In and around Concord, city or town hall handles matters such as zoning, permits and utilities within town limits, and the county still keeps the parcel and deed records. Acreage past the town limits out by Mount Pleasant generally answers to county rules rather than the town's.
How a plat differs from the tax map
The tax map on the Cabarrus County parcel viewer is a summary, whereas the plat carries surveyed dimensions.
Limits of the parcel data
Parcel lines are drawn for taxes, not measured on the ground, so the edge of a yard near Midland can sit several feet off the line on screen. For a parcel near Midland, owner names and values update on a schedule, so a deed recorded last month may not show yet.
Who handles what
Questions about value or the owner field for land near Harrisburg go to the county tax office, since that office keeps the assessment data. Questions about what you can build around Concord go to planning, building or health offices, town or county, depending on location.
Metes and bounds instead
Acreage around Midland outside a subdivision may have no plat at all; the deed and any recorded survey describe it instead.
Where the recorded documents are
For anything that matters, request the recorded deed from the Register of Deeds; the parcel map near Midland only summarizes it. For a tract near Concord, have ready the book and page from the tax record and the lookup takes minutes.
Neighboring parcel maps
Cabarrus County borders Iredell County, Mecklenburg County, Rowan County, Stanly County, and Union County; every one of them runs a separate parcel map. Acreage along the edge near Harrisburg can show up in two county records, so look at the neighboring map before you assume the acreage. Around Mount Pleasant, the Platbookmapper state page lists each bordering county map across North Carolina.
Amended plats
Lots near Mount Pleasant can be combined or reconfigured by a replat, so check for later filings; vacated streets or alleys also get recorded.
Reading the legal description
Tracts outside towns near Mount Pleasant commonly use metes-and-bounds descriptions, a series of courses and distances from a starting point. Subdivision lots in Midland usually use lot and block from a recorded plat instead, making them easier to find. Copy the legal description from the record for the parcel near Mount Pleasant when you talk to a surveyor.
Details on the Kannapolis plat map
Utility or drainage strips on a lot in Kannapolis limit where you can build or fence; read the notes on the sheet.
On site with the map
The parcel map usually runs in a mobile browser, handy when you're parked on a road near Locust, so load it before you lose signal. A saved image of the lot near Locust and its lines is a good backup.
Getting your bearings
Concord serves as the county seat, where most land records are kept. You'll also find Harrisburg, Mount Pleasant, and Midland. About 240,016 people live in Cabarrus County (Census estimate, 2023) spread over roughly 361 square miles. Cabarrus County was organized in 1792, and some chains of title near Locust are long. Landmarks such as Yadkin River are easy to spot when you zoom out from Midland.
Ordering the Kannapolis plat map
For acreage around Concord, many recorder offices offer an online index, otherwise call or visit with the reference; copy fees are usually small.
Frequently asked
Can lots near Locust be combined?
Combining or splitting lots near Harrisburg usually needs a recorded plat change, often with a surveyor's drawing.
Who has recorded plats for land near Mount Pleasant?
Good question; copies come from the Register of Deeds, often through an online index; use the plat reference from the deed or parcel record.
Are old plats online around Locust?
In most cases, the Register of Deeds can say what's available, including older subdivisions.
What is a lot and block description around Locust?
Good question; it points to a spot on the plat for that subdivision near Harrisburg; the deed names the subdivision.
Does the parcel map work on a phone around Harrisburg?
No app is needed for most county viewers; load it before you lose coverage near Midland.
Open the official Cabarrus County, NC parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.