Blog · October 14, 2026 · Texas
Reading the Levelland Flood Zone Map for a parcel
Flood zones are set by FEMA, and checking one near Smyer takes a few minutes.
Main page: Hockley County, TX GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before you buy or build near Ropesville, pull up the Levelland flood zone map: FEMA's zone label affects insurance, building rules and resale. In this Levelland guide: finding the address on FEMA's map, reading the zone codes, and pairing it with the Hockley CAD interactive map.
The Levelland flood zone map: start here
Start with FEMA's Flood Map Service Center: search an address around Ropesville, then open the map view for that panel. Vacant ground around Ropesville can still be found: search the nearest road and click the spot.
The viewer Hockley County publishes
Go first to the Hockley CAD interactive map; it covers every assessed parcel in the county, Smyer included. In and around Sundown, put in a street address, an owner's name or a parcel number, then pick the result to center the map on it. On ground around Anton, write down the parcel ID from that panel; every records desk in the county uses it to find the file.
What to request from a seller
Ask the seller about past flood claims on the property near Opdyke West; an insurance quote early avoids surprises.
Limits of the parcel data
Acreage on the record is a tax-roll number; just a licensed surveyor sets the real corners on land around Opdyke West. Closer to Sundown, owner names and values update on a schedule, so a deed recorded last month might lag behind.
Where Levelland fits in
Levelland is part of Hockley County, Texas, so its parcels are on the county's map. Levelland is also the county seat, handy when you need recorded documents. For a tract near Ropesville, city or town hall handles things like zoning, permits and utilities for lots inside the boundary, and the county still keeps the parcel and deed records. Land beyond the town limits out by Sundown usually answers to county rules instead.
Taking the map into the field
Most viewers work in a phone browser, which helps when you're standing on land near Sundown, so load it before you lose signal. A printout of the tract near Sundown keeps working without signal.
Legal descriptions in Texas
Tracts outside towns near Ropesville are often described by metes and bounds, listing bearings, distances and landmarks. Platted lots around Ropesville usually use lot and block from a recorded plat instead, making them easier to find. Copy the legal description from the record for the parcel near Smyer when you talk to a surveyor.
Which office to call
For assessment questions about property around Smyer go to the appraisal district, the office behind the parcel record. Questions about what you can build around Smyer are for the local planning and health departments, town or county, depending on location.
Water near Sundown
Low-lying fields near Ropesville may not have detailed mapping, so look for water marks and debris lines. Wet ground around Smyer is a separate issue from flood zones; the National Wetlands Inventory mapper shows mapped wetlands.
What the zone letters mean
For property near Sundown, any A or V zone are Special Flood Hazard Areas, land with a 1-percent chance of flooding in any year. Out toward Smyer, a shaded X area is moderate risk, roughly the 100- to 500-year range; unshaded X is minimal risk.
Backing up the map with records
The map is an index, not the title: recorded deeds, subdivision plats and easements covering ground around Sundown sit with the County Clerk. For a tract near Opdyke West, have ready the instrument number shown in the record panel so staff can find the deed fast.
Use the county map alongside FEMA
FEMA doesn't draw property lines, so pair it with the Hockley CAD interactive map to confirm you have the right parcel near Sundown.
Insurance, lenders and building
If the land is near Anton, get the Elevation Certificate if one exists: it records the building's elevation against the base flood. Remodeling a house in a zone near Anton often needs a floodplain permit; call the permitting office early.
When a parcel crosses a boundary
Hockley County meets Bailey County, Cochran County, Hale County, Lamb County, and Lubbock County, all with their own assessor records. Ground near Smyer that runs to the line can show up in two county records, so check the neighboring map too. For a home near Opdyke West, the Platbookmapper state page lists each neighboring county map for Texas.
Questions about the Levelland flood zone map
What is a base flood elevation in Levelland?
Short answer: a BFE near Opdyke West tells builders how high the lowest floor should be; surveyors near Anton use it often.
Is my property near Ropesville in a flood zone?
For most people, FEMA's free map shows the zone for any spot near Smyer; then confirm the parcel on the county viewer.
Is Zone X safe from flooding near Anton?
Short answer: X zones around Ropesville are lower risk, not no risk; FEMA notes that a large share of claims come from these areas.
What does Zone AE mean near Sundown?
In most cases, an AE zone has a 1% annual chance of flooding and a base flood elevation, which shapes building rules near Sundown.
Does the parcel map work on a phone for land near Sundown?
The map near Sundown usually works on a phone; screenshots help offline.
Open the official Hockley County, TX parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.