Blog · October 14, 2026 · Illinois
Reading the Litchfield Plat Map for a lot
A recorded plat shows how land near Taylor Springs was divided into lots.
Main page: Montgomery County, IL GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
When a deed near Raymond says lot and block, you'll need the Litchfield plat map to make sense of it. This Litchfield guide covers: where to request a copy, plat versus tax map, and what to look for on the sheet.
Getting started with the Litchfield plat map
For a lot in Litchfield, the deed or parcel record often names the subdivision and plat reference; that makes the request quick.
Opening the official parcel viewer
Go first to the Montgomery County Beacon site; it maps each tax parcel around Schram City and Hillsboro. If the land is near Taylor Springs, type a street address, an owner's name or a parcel number, and the viewer zooms to the match. For a home near Butler, a pop-up or side panel normally shows the owner of record, assessed acreage, a parcel ID and sometimes recent sales.
When there's no plat
Acreage around Butler outside a subdivision may have no plat at all; look for a recorded survey for land near Schram City.
On site with the map
The parcel map usually runs in a mobile browser, useful out on a road near Schram City, so load it before you lose signal. A saved image of the lot near Schram City and its lines keeps working without signal.
Litchfield and the county around it
Litchfield is part of Montgomery County, Illinois, which means parcel data comes from the county. If the land is near Taylor Springs, City or town hall handles things like zoning, permits and utilities for lots inside the boundary, while the county keeps the tax map. Lots just outside the city limits near Taylor Springs usually follows county rules rather than the town's.
Amended plats
An amended plat may change lots around Butler, search the index for replats of the same subdivision; vacated streets or alleys also get recorded.
What the map can't tell you
Parcel lines are drawn for taxes, not measured on the ground, so a fence near Raymond may sit some distance off the line on screen. In and around Walshville, owner names and values update on a schedule, so a deed recorded last month might lag behind.
How land is described here
Illinois is laid out under the Public Land Survey System, so deeds around Schram City reference sections and townships. Each section is nominally a mile square, about 640 acres, with 36 sections to a township, though real sections near Taylor Springs vary in size. Keep the legal description for land near Schram City when you talk to a surveyor.
Neighboring parcel maps
Montgomery County touches Bond County, Christian County, Fayette County, Macoupin County, and Madison County; every one of them runs a separate parcel map. Ground near Walshville that runs to the line may show up across two assessors' files, so look at the neighboring map too. Closer to Schram City, the Platbookmapper state page lists each bordering county map across Illinois.
Who handles what
Questions about value or the owner field for land near Schram City are handled by the Supervisor of Assessments, working with township assessors, which maintains the tax roll. Building or septic questions for a lot near Raymond go to planning, building or health offices, depending on whether the land is inside town limits.
Recorded plat or GIS layer
The tax map on the Montgomery County Beacon site is a summary, while the recorded plat is the legal document.
What a plat shows
If you're looking near Walshville, the sheet usually includes lot and block numbers, dimensions and bearings, street rights-of-way and easements.
Recorded documents worth pulling
For anything that matters, pull the recorded deed through the county Recorder of Deeds (in many counties the County Clerk and Recorder); the parcel map near Walshville only summarizes it. Long-held tracts around Butler may trace back through many deeds, so a title company is worth hiring on a real sale.
Getting your bearings
Hillsboro serves as the county seat, where most land records are kept. You'll also find Butler, Walshville, and Taylor Springs, where town lots give way to larger tracts. Around 27,663 people live in Montgomery County (Census estimate, 2023) across about 704 square miles. Montgomery County dates to 1821, which matters when you trace an old farm's title.
Getting a copy
On ground around Butler, some counties put plat images online, otherwise call or visit with the reference; small fees are common.
Frequently asked
What is a replat in Litchfield?
Good question; lot splits in Litchfield go through the planning office.
How is a plat different from the parcel map near Schram City?
For property near Raymond, a recorded plat is based on a survey, but the GIS map is not; trust the plat when they differ.
How do I get a copy of a plat in Litchfield?
For most people, the county Recorder of Deeds (in many counties the County Clerk and Recorder) keeps recorded plats.
Are old plats online near Schram City?
If you're looking near Walshville, it varies; some offices have scanned older plats and some haven't, including older subdivisions.
Does the parcel map work on a phone around Hillsboro?
Closer to Schram City, most viewers run in a mobile browser; screenshots help offline.
Open the official Montgomery County, IL parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.