Platbookmapper County GIS Directory

Blog · October 14, 2026 · Mississippi

Madison County Flood Zone Map in Mississippi

Look up any Madison County address on FEMA's flood map, read the zone, and match it to the parcel record for land around Jackson.

VIEW PLATBOOK MAPPER

A recorded plat sheet spread on a table

Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.

A Madison County flood zone map check belongs in the due diligence for any Madison County property, from a house lot in Jackson to farm ground near Canton. You can check it yourself for any Jackson address in a few minutes.

Below are the FEMA links, a plain reading of the zone labels, notes on where water shapes land around Jackson, and short answers to common questions.

How to check the Madison County flood zone map

Open the FEMA Flood Map Service Center and type a county street address, say one in Ridgeland. If a tract near Canton has no street number yet, search the nearest road and pan to it. On acreage outside Ridgeland, FEMA's National Flood Hazard Layer viewer draws the zones over aerial imagery, which displays how much of a county parcel sits inside the zone. Switch to the Madison County parcel viewer and locate the same tract near Canton. Laying the county parcel outline beside the FEMA shading displays whether a homesite near Canton sits above or inside the zone.

Step one: the free Madison County viewer

For land around Ridgeland, open the Madison County parcel viewer; it is the map Madison County itself publishes. Most people locate their Madison County tract fastest by searching an address in Ridgeland, then clicking the outline. Our Madison County, MS page keeps the official link and the maps next door to Ridgeland in one place.

Reading the zones on a Madison County flood map

For a lot in Ridgeland, the label matters more than the color: A and V zones are Special Flood Hazard Areas, defined by a 1-percent annual chance of being flooded. Zone AE near Canton means FEMA published a base flood elevation; plain Zone A means no detailed elevation was studied. Shaded Zone X around Ridgeland sits in the moderate band between the 100-year and 500-year floods. Clear, unshaded X near Ridgeland is outside the 500-year floodplain.

Waterfront parcels near Canton

Parcels touching Big Black River deserve a FEMA check before anything else in Madison County. On many tracts close to Ridgeland, the zone covers the low ground by the water while the homesite near the road is outside it. A creek near Canton that displays no detailed zone, which is why it is worth walking the ground after a heavy rain.

A short buyer checklist for Canton

For a house near Gluckstadt, ask the seller for any elevation certificate on file and the current flood insurance declarations page. Quotes for land near Livingston depend on the zone and the building's elevation, so bring both to the agent.

Floodways and restudies near Jackson

Zones on the map covering Jackson can change after a restudy, so the date on the county panel matters. A floodway on a county panel marks the part of the floodplain that carries the main flow, and it is treated more strictly than the rest of the zone near Livingston.

When the map affects a deal

Lenders watch the zone closely on Madison County properties. Where a building in Ridgeland falls inside an A or V zone and carries a federally backed mortgage, flood insurance is mandatory; that applies where the local government around Canton is in the National Flood Insurance Program. Outside the A zones around Canton, federal rules do not require a policy, though a lender in Mississippi can still ask for it. Think the map is wrong about a house in Ridgeland? FEMA's LOMA process allows a review, typically backed by an elevation certificate from a surveyor who works in Madison County. Building or filling inside a mapped zone near Ridgeland has to meet local floodplain rules, so call the county or the town office in Ridgeland before work starts.

Madison County flood zones questions

Who prepares an elevation certificate for a house in Gluckstadt?

A licensed surveyor or engineer prepares it, and the building office serving Gluckstadt may already have one on file for newer construction.

Do I need a permit to build in the floodplain near Gluckstadt?

Building in a Special Flood Hazard Area near Gluckstadt typically needs a floodplain permit and may require elevating the structure, so check with the county floodplain administrator.

Can I see flood zones on the Madison County GIS map?

Check the layer list in the Madison County parcel viewer; if Madison County includes a floodplain layer, confirm the zone on FEMA's map anyway.

Does a 100-year floodplain near Ridgeland flood only once a century?

No; land near Ridgeland in the 100-year floodplain has a 1-percent chance of flooding every year, not a once-a-century schedule.

What is a base flood elevation for a Madison County property?

On the map covering Gluckstadt, it is the projected water surface in the base flood, and it is printed in AE zones.

Is flood insurance required for a Zone X lot in Gluckstadt?

FEMA doesn't require it for a Zone X lot in Gluckstadt, but coverage is available and some lenders ask for it.

Open the official Madison County, MS parcel map Madison County in the Platbookmapper directory

Related

← All posts · Open the map