Blog · October 14, 2026 · Kansas
Using the Mitchell County Flood Zone Map
The zone on FEMA's map affects insurance, building and resale near Scottsville.
Main page: Mitchell County, KS GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before an offer near Simpson, check the Mitchell County flood zone map: the zone on that map shapes insurance, permits and resale. What this Mitchell County guide covers: finding the address on FEMA's map, decoding A, AE and X, and matching it with the county parcel viewer.
Where the Mitchell County flood zone map lives
Out toward Glen Elder, flood zones come from FEMA's Flood Map Service Center: enter the street address, and choose the dynamic map. Rural land near Solomon Rapids with no street number can still be found: zoom in from the nearest road and click inside the land.
Pulling up a parcel
Closer to Tipton, the public parcel map for this area is the ORKA parcel viewer, and it opens in a browser with no account. If the land is near Beloit, enter a street address, an owner's name or a parcel number, and the viewer zooms to the match. For property near Glen Elder, write down the parcel ID from that panel; every office in the county will want it.
What the zone letters mean
If you're looking near Cawker City, zones beginning with A or V mark the Special Flood Hazard Area, which FEMA defines as a 1% annual chance of flooding. For acreage around Solomon Rapids, shaded Zone X is moderate risk, between the 1% and 0.2% annual chance floods; plain X, or C on older maps, means minimal mapped risk.
A quick look at the area
Beloit serves as the county seat, home to the main records offices. Smaller places on the map include Cawker City, Glen Elder, Hunter, and Scottsville. Roughly 5,719 people call Mitchell County home (Census estimate, 2023) on about 702 square miles. Mitchell County dates to 1867, which matters when you trace an old farm's title.
Lining it up with the parcel map
If only part of a parcel near Beloit is shaded, what matters is where the building sits.
Before you lean on the lines
The acreage figure is an assessed number; just a licensed surveyor establishes the real lines on land around Glen Elder. Near Tipton, records update in batches, so a deed recorded last month might lag behind.
What a flood zone means for a buyer
If a building sits in a Special Flood Hazard Area and a federally regulated lender is involved, mandatory purchase rules apply in communities in the NFIP, and that holds around Tipton too. New construction in a floodplain near Cawker City usually means extra permit review; check with the county or town building office before you plan.
How land is described here
Kansas is laid out under the Public Land Survey System, so rural legal descriptions near Cawker City cite section, township and range. A standard section is about one square mile, roughly 640 acres, and a township holds 36 of them, though real sections near Hunter vary in size. Copy the legal description from the record for the parcel near Asherville when you talk to a surveyor.
Getting answers from the right desk
If the acreage or value on a parcel near Scottsville looks off go to the County Appraiser, since that office keeps the assessment data. Building or septic questions for a lot near Cawker City are for the local planning and health departments, depending on whether the land is inside town limits.
Questions to ask before you buy
On ground around Scottsville, ask the seller for any Elevation Certificate before closing; an insurance quote early avoids surprises.
Water near Simpson
Small streams around Solomon Rapids may not have detailed mapping, so ask neighbors about past flooding. Wet ground around Beloit is a separate issue from flood zones; the National Wetlands Inventory mapper shows mapped wetlands.
The paper trail behind a parcel
Closer to Simpson, the map is an index, not the title: recorded deeds, plats and easements for parcels in the county are filed with the Register of Deeds. If the land is near Glen Elder, use the book and page shown in the record panel so staff can find the deed fast.
Neighboring parcel maps
Mitchell County borders Cloud County, Jewell County, Lincoln County, Osborne County, and Ottawa County, and each of those keeps its own parcel map. Ground near Asherville that runs to the line can show up across two assessors' files, so open the adjacent map too. In and around Glen Elder, the Platbookmapper state page lists every bordering county map for Kansas.
Frequently asked
How often are flood maps updated for land near Solomon Rapids?
Short answer: a new study can move a zone line near Tipton; your community is notified before changes take effect.
Is my property near Beloit in a flood zone?
Usually, FEMA's free map shows the zone for any spot near Simpson; then confirm the parcel on the county viewer.
When is flood insurance required near Asherville?
For a building near Glen Elder in an A or V zone with a federally backed or regulated mortgage, it's generally required; elsewhere it's optional.
What is a base flood elevation in Mitchell County?
For a parcel near Glen Elder, the BFE is printed in AE zones on FEMA's map; local rules may require building above it.
How is land described in Kansas deeds for land near Glen Elder?
For a home near Tipton, Deeds use lot and block, metes and bounds or survey descriptions; a surveyor can interpret it.
Open the official Mitchell County, KS parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.