Blog · October 14, 2026 · Texas
Morris County Flood Zone Map, Texas: a practical guide
Flood zones are set by FEMA, and checking one near Hughes Springs takes a few minutes.
Main page: Morris County, TX GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Weighing a property around Daingerfield? The Morris County flood zone map tells you whether it sits in a FEMA flood zone, and no account is needed. Covered here for Morris County: finding the address on FEMA's map, decoding A, AE and X, and pairing it with the appraisal district interactive map.
Getting started with the Morris County flood zone map
Closer to Jenkins, start with FEMA's Flood Map Service Center: enter the street address, and choose the dynamic map. Rural land near Omaha with no street number can still be found: zoom in from Interstate 30 then click the parcel area.
Getting to the right map
Go first to the appraisal district interactive map; it maps every tax parcel from Hughes Springs to Naples. If you only know roughly where the land is, pan along Interstate 30 and click the parcel itself. With a lot near Cason, save the parcel ID from that panel; every clerk in the county asks for it first.
What the map can't tell you
For a home near Jenkins, listed acreage is an estimate; only a licensed surveyor sets the real boundary on the ground. On ground around Cason, owner names and values update on a schedule, so a deed recorded last month may not show yet.
Low spots and local drainage
Small streams around Daingerfield may not have detailed mapping, so ask neighbors about past flooding. Wetlands near Lone Star can limit building even outside a flood zone; check the National Wetlands Inventory mapper for a first look.
Questions to ask before you buy
For acreage around Hughes Springs, ask the listing agent whether the home has flooded before closing; an insurance quote early avoids surprises.
Reading A, AE and X
On ground around Jenkins, A and V zones mark the Special Flood Hazard Area, which FEMA defines as a 1% annual chance of flooding. Around Lone Star, a low-risk label isn't a guarantee: according to FEMA, many claims come from moderate- and low-risk areas.
Lining it up with the parcel map
FEMA's map shows zones but not ownership, so open the appraisal district interactive map next to see exactly which lot near Daingerfield you're looking at.
Lenders and permits
For a structure inside an A or V zone and the loan is federally backed or regulated, the lender will require flood insurance in communities in the NFIP, whether the land is near Omaha or elsewhere in the county. Building or adding on near Lone Star in a mapped zone usually means extra permit review; check with the county or town building office early.
Which office to call
If the acreage or value on a parcel near Cason looks off are handled by the appraisal district, the office behind the parcel record. Zoning, permits and septic questions near Omaha need the planning or permitting office, town or county, depending on location.
Taking the map into the field
The parcel map usually runs in a mobile browser, which helps when you're standing on land near Cason, but coverage can be spotty out of town. A printout of the tract near Omaha helps when you meet an owner or agent.
Next door to Morris County
Morris County meets Bowie County, Camp County, Cass County, Marion County, and Red River County; every one of them runs a separate parcel map. A tract near the line by Omaha can show up in two county records, so look at the adjacent map too. For land near Naples, our state page links every bordering county map across Texas.
Backing up the map with records
For anything that matters, pull the recorded deed from the County Clerk; the parcel line is a drawing of it, which applies near Daingerfield as much as anywhere. If you're looking near Jenkins, bring the instrument number listed on the parcel record to skip a name search.
Sections, lots and bearings
Rural deeds near Omaha are often described by metes and bounds, a series of courses and distances from a starting point. Subdivision lots in Daingerfield usually use lot and block from a recorded plat instead, making them easier to find. Write down the legal description for the tract near Cason when you talk to a surveyor.
Morris County: common questions
How often are flood maps updated in Morris County?
For acreage around Lone Star, FEMA revises flood maps panel by panel as new studies finish; check the effective date on the panel.
Can I see flood zones on the appraisal district interactive map in Morris County?
Short answer: some county viewers include a FEMA flood layer; confirm a lot near Daingerfield on FEMA's map either way.
What is a base flood elevation around Daingerfield?
For a home near Lone Star, the base flood elevation is the water level expected in the 1% annual chance flood, and an Elevation Certificate compares the building to it.
Can a property in Zone X near Omaha flood?
Out toward Hughes Springs, shaded X is moderate risk and unshaded X is minimal risk, and floods still happen outside high-risk zones.
Where is the legal description for land near Jenkins?
Around Daingerfield, deeds use lot and block, metes and bounds or survey descriptions, and the parcel record often summarizes it.
Open the official Morris County, TX parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.