Blog · October 14, 2026 · Montana
Using the Park County Flood Zone Map
The zone on FEMA's map affects insurance, building and resale near Yellowstone National Park.
Main page: Park County, MT GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
Before an offer near Custer National Forest, check the Park County flood zone map: FEMA's zone label affects insurance, building rules and resale. What this county guide covers: finding the address on FEMA's map, reading the zone codes, and confirming the outline on the county map for land near Cooke City.
Getting started with the Park County flood zone map
For land near Corwin Springs, flood zones come from FEMA's Flood Map Service Center: enter the street address, then open the map view for that panel. Vacant ground around Clyde Park is still easy to locate: zoom in from the nearest road and click inside the land.
Pulling up a parcel
Your first stop is the Park County ArcGIS parcel map; it covers every assessed parcel from Yellowstone National Park to Gardiner. For property near Gardiner, enter a street address, an owner's name or a parcel number, then pick the result to center the map on it. Closer to Livingston, the record panel normally shows the owner of record, assessed acreage, a parcel ID and sometimes recent sales.
Which office to call
Anything recorded against property around Emigrant sit in the index kept by the County Clerk and Recorder, sometimes only in person. Building or septic questions for a lot near Corwin Springs go to planning, building or health offices, town or county, depending on location.
A short flood checklist
For acreage around Gallatin National Forest, ask the seller whether the home has flooded before closing; getting a quote early keeps the budget honest.
Reading A, AE and X
If you're looking near Yellowstone National Park, any A or V zone are Special Flood Hazard Areas, meaning a 1% or greater chance of flooding each year. For acreage around Emigrant, a low-risk label isn't a guarantee: according to FEMA, many claims come from moderate- and low-risk areas.
Field tips
Most viewers work in a phone browser, which helps when you're standing on land near Livingston, though signal can drop in rural spots. A screenshot of the parcel near Emigrant with its ID is a good backup.
Backing up the map with records
Before you sign anything, get the recorded deed through the County Clerk and Recorder; the viewer just points to it, and that holds around Corwin Springs too. With a lot near Jardine, use the document number listed on the parcel record to skip a name search.
Sections, lots and bearings
Montana follows the Public Land Survey System, so rural legal descriptions near Cooke City cite section, township and range. A standard section is about one square mile, roughly 640 acres, with 36 sections to a township, though real sections near Cooke City vary in size. Copy the legal description from the record for the parcel near Cooke City when you talk to a surveyor.
Beyond the mapped zones
Low-lying fields near Gardiner may not have detailed mapping, so ask neighbors about past flooding. Wet ground around Gallatin National Forest is a separate issue from flood zones; the National Wetlands Inventory mapper shows mapped wetlands.
Lining it up with the parcel map
FEMA's map shows zones but not ownership, so check the Park County ArcGIS parcel map too to see exactly which lot near Livingston you're looking at.
Before you lean on the lines
For a home near Cooke City, listed acreage is an estimate; just a licensed surveyor establishes the real boundary on the ground. Closer to Emigrant, owner names and values update on a schedule, so a deed recorded last month may not show yet.
What a flood zone means for a buyer
If a building sits in a Special Flood Hazard Area and a federally regulated lender is involved, the lender will require flood insurance where the community participates in the National Flood Insurance Program, which applies near Custer National Forest as much as anywhere. Remodeling a house in a zone near Corwin Springs often needs a floodplain permit; call the permitting office early.
Park County in a few facts
Livingston is the county seat, where most land records are kept. You'll also find Clyde Park, Cooke City, Corwin Springs, and Emigrant, each with its own cluster of lots. Around 17,903 people live in Park County (Census estimate, 2023) spread over some 2,802 square miles. The county was organized in 1887, which matters when you trace an old farm's title around Livingston. Features like Yellowstone National Park make handy reference points on the map.
Quick answers
How do I get a property removed from a flood zone in Park County?
FEMA's LOMA process is the usual route when a building near Cooke City sits above the base flood elevation; it starts with an elevation survey.
How often are flood maps updated around Livingston?
For a parcel near Cooke City, FEMA revises flood maps panel by panel as new studies finish, so look at the panel date.
Does the county parcel map show flood zones near Yellowstone National Park?
Short answer: a flood layer may appear in the Park County ArcGIS parcel map layer list, though it can lag behind FEMA's current panels.
When is flood insurance required around Corwin Springs?
For a tract near Cooke City, it's typically required only for structures in high-risk zones with federally backed loans, in communities that take part in the NFIP.
How is land described in Montana deeds around Gallatin National Forest?
If the land is near Gallatin National Forest, it's the formal description of the land in the deed; a surveyor can interpret it.
Open the official Park County, MT parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.