Platbookmapper County GIS Directory

Blog · October 14, 2026 · Texas

Reading the Port Arthur Flood Zone Map for a parcel

The zone on FEMA's map affects insurance, building and resale near Beaumont.

VIEW PLATBOOK MAPPER

A recorded plat sheet spread on a table

Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.

Weighing a property around Nederland? Checking the Port Arthur flood zone map reveals whether the lot falls inside a mapped floodplain, and it costs nothing to check. What this Port Arthur guide covers: locating a parcel on FEMA's map, reading the zone codes, and pairing it with the Jefferson County ArcGIS parcel map.

Checking the Port Arthur flood zone map step by step

Flood zones come from FEMA's Flood Map Service Center: search an address around Groves, then open the map view for that panel. A tract near Bevil Oaks without an address can still be found: zoom in from US Route 96 then click the parcel area.

Where the parcel data lives

Your first stop is the Jefferson County ArcGIS parcel map; it maps every tax parcel from Taylor Landing to Groves. Without an address in hand, follow US Route 96 on the aerial and click the parcel itself. For a home near Taylor Landing, the parcel card typically gives the owner of record, assessed acreage, the parcel number and often a sale date.

Field tips

Most viewers work in a phone browser, handy when you're parked on a road near Bevil Oaks, though signal can drop in rural spots. A printout of the tract near Nederland helps when you meet an owner or agent.

Who handles what

If the acreage or value on a parcel near Groves looks off belong with the appraisal district, the office behind the parcel record. Zoning, permits and septic questions near Groves are for the local planning and health departments, town or county, depending on location.

Port Arthur, TX: the basics

Port Arthur is part of Jefferson County, Texas, and the county assessor maps its lots. For property near Port Neches, city or town hall handles matters such as zoning, permits and utilities inside its limits, and the county still keeps the parcel and deed records. Land beyond the city limits out by Nederland usually falls under county rules rather than the town's.

Reading A, AE and X

An AE label includes a base flood elevation (BFE), which plain A zones lack; builders around Port Neches design to it. On ground around Groves, shaded Zone X marks moderate flood hazard, between the 1% and 0.2% annual chance floods; unshaded X means minimal mapped risk.

Older tracts around Groves are often described by metes and bounds, listing bearings, distances and landmarks. Platted lots around Bevil Oaks refer to a recorded plat, making them easier to find. Keep the legal description for land near Port Neches when you talk to a surveyor.

Lining it up with the parcel map

FEMA doesn't draw property lines, so pair it with the Jefferson County ArcGIS parcel map to see exactly which lot near Groves you're looking at.

What a flood zone means for a buyer

For a parcel near Taylor Landing, an Elevation Certificate from a surveyor helps: it compares the building to the BFE. Remodeling a house in a zone near Bevil Oaks often needs a floodplain permit; check with the county or town building office early.

Questions to ask before you buy

Request whether the home has flooded on the property near Nederland; getting a quote early avoids surprises.

Neighboring parcel maps

Jefferson County borders Cameron Parish, LA, Chambers County, Hardin County, Liberty County, and Orange County, all with their own assessor records. Ground near Bevil Oaks that runs to the line may be split in two county records, so open the adjacent map as well. For a home near Bevil Oaks, our state page lists every neighboring county map across Texas.

Limits of the parcel data

The acreage figure is an estimate; just a licensed surveyor can set the real boundary for a parcel near Port Neches. Closer to Beaumont, records update in batches, so a deed recorded last month might lag behind.

Beyond the mapped zones

Small streams around Port Neches aren't always studied in detail, so look for water marks and debris lines. Marshy spots near Port Neches can limit building too; the National Wetlands Inventory mapper shows mapped wetlands.

Getting your bearings

Beaumont holds the county offices, where most land records are kept. You'll also find Groves, Port Neches, Nederland, and Taylor Landing. Around 251,496 people live in Jefferson County (Census Bureau estimate, 2023) on about 877 square miles. Jefferson County was organized in 1837, and some chains of title near Beaumont are long. Features like Pine Island Bayou, Neches River, and Sea Rim State Park are easy to spot when you zoom out from Bevil Oaks.

Questions about the Port Arthur flood zone map

Is there a flood layer on the parcel viewer near Port Neches?

For most people, a flood layer may appear in the Jefferson County ArcGIS parcel map layer list, though it can lag behind FEMA's current panels.

What is a LOMA in Port Arthur?

For most people, FEMA's LOMA process is the usual route when a building near Nederland sits above the base flood elevation; it starts with an elevation survey.

How often are flood maps updated near Groves?

For most people, a new study can move a zone line near Nederland; check the effective date on the panel.

When is flood insurance required around Groves?

Usually, for a building near Taylor Landing in an A or V zone with a federally backed or regulated mortgage, it's generally required; outside those zones it's your call.

What's the tax parcel number used for in Port Arthur?

It's the number the appraisal district uses to track a tract near Groves; copy it before you call anyone.

Open the official Jefferson County, TX parcel map See it in the Platbookmapper directory

Related

← All posts · Open the map