Blog · October 14, 2026 · Missouri
The Pulaski County Flood Zone Map: a Missouri guide
Look up any Pulaski County address on FEMA's flood map, read the zone, and match it to the parcel record for land around Waynesville.
Main page: Pulaski County, MO GIS & Parcel Viewer (official map link, Pulaski County facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
The Pulaski County flood zone map question tends to arrive at a bad moment: a lender's letter, an insurance quote, or a permit counter in St. Robert. FEMA's free Flood Map Service Center and the Pulaski County parcel viewer answer it together.
Next: FEMA's search tool, the zone labels you'll see for Pulaski County, and how the parcel record confirms which tract you're on.
How to check the Pulaski County flood zone map
Start at the FEMA Flood Map Service Center and enter the property address in Richland or anywhere else in the county. The site returns the effective Flood Insurance Rate Map (FIRM) panel covering that Richland location, which you can view or download. For an irregular lot near Crocker, FEMA's National Flood Hazard Layer viewer draws the zones over aerial imagery and reports the zone wherever you click near Richland. Next, the IntegrityGIS - Pulaski County confirms which Pulaski County parcel you're looking at. The Pulaski County record gives the parcel ID and legal description that an insurer or lender near Richland may ask for.
Finding the tract on the Pulaski County map
Pulaski County publishes its parcels on the IntegrityGIS - Pulaski County, which runs on an Integrity GIS parcel viewer, free to use for a lot in Dixon or a tract close to Waynesville. Most people find their Pulaski County tract fastest by searching an address in Waynesville, then clicking the outline. If the official address for the Pulaski County, MO map ever changes, our directory page carries the current link for Dixon and the rest of the county.
Tracts that cross the Pulaski County line
A farm near the county line can carry separate records in Camden County, Laclede County, and Maries County as well. Our Missouri page links each map neighboring Pulaski County.
From Waynesville to the back roads
Town lots cluster around Waynesville, the county seat, and Crocker, Dixon, Richland, and St. Robert. Smaller places such as Fort Leonard Wood, Big Piney, and Buckhorn appear on the Pulaski County map as little clusters of lots. Census Bureau estimates put Pulaski County at about 53,812 residents in 2023 on about 547 square miles of land. Platted neighborhoods near Waynesville give way to rural acreage elsewhere in the county.
Where Pulaski County land records are kept
The parcel layer for Pulaski County points back to recorded deeds and plats, kept by the county's recording office (its title varies by state). Copy the parcel ID and legal description from the county record before you request a deed for land near Waynesville.
Reading the zones on a Pulaski County flood map
Any Pulaski County parcel shaded as Zone A, AE, AH or AO sits in what FEMA calls a Special Flood Hazard Area, defined by a 1-percent annual chance of being flooded. A surveyor working near Richland uses the base flood elevation printed for AE zones; unnumbered A zones don't have one. Land near Crocker in shaded X (Zone B on older maps) is moderate risk, between the 1-percent and 0.2-percent annual chance lines. Unshaded X (or C) on the Pulaski County panel means minimal risk.
Unmapped creeks in Pulaski County
A creek near Crocker that lists no detailed zone can still flood; FEMA says moderate- and low-risk areas still carry risk.
When the map affects a deal
Insurance is the practical stake for a Pulaski County buyer. Where a building in Richland falls inside an A or V zone and carries a federally backed mortgage, federal rules call for flood insurance, as long as Pulaski County or the town participates in the NFIP. Outside the A zones around Crocker, insurance is a choice, not a mandate, although some lenders require it anyway. When a Pulaski County homesite is on a rise inside a mapped zone, FEMA's LOMA process allows a review, most often backed by an elevation certificate from a surveyor who works in Pulaski County. Adding on to a house near Crocker inside the zone has to meet local floodplain rules; the county floodplain administrator can say what applies.
Pulaski County, MO: common questions
How do I challenge a flood zone for a lot in Crocker?
An owner near Richland can request a Letter of Map Amendment from FEMA with elevation data, most often from a licensed land surveyor.
What is a base flood elevation for a Pulaski County property?
For a county property in Zone AE, the base flood elevation marks how high the 100-year flood is expected to rise, and a surveyor compares the building near Crocker to it.
Where do I get an elevation certificate in Pulaski County?
A licensed land surveyor or engineer prepares it, and the building office serving Crocker may already have one on file for newer construction.
Do I need flood insurance in Zone X in Pulaski County?
FEMA doesn't require it for a Zone X lot in Crocker, but coverage is available and some lenders ask for it.
How can I check a Pulaski County, MO flood zone?
Look it up at FEMA's Flood Map Service Center, then match the parcel lines in the IntegrityGIS - Pulaski County; for land near Richland, a zone starting with A or V is high risk.
Open the official Pulaski County, MO parcel map Pulaski County in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.