Blog · October 17, 2026 · Tennessee
Louisville Plat Map, Tennessee: plats and lots
A recorded plat shows how land near Vonore was divided into lots.
Main page: Blount County, TN GIS & Parcel Viewer (official map link, county facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
When a deed near Rockford says lot and block, the Louisville plat map is where those numbers come from. In this Louisville guide: where plats are filed, how a plat differs from a parcel map, and what to look for on the sheet.
The Louisville plat map: start here
For a subdivision near Maryville, the deed usually cites the plat; use it to request a copy.
Pulling up a parcel
Begin with the Tennessee Property Viewer; it includes every assessed parcel around Townsend and Alcoa. For a parcel near Maryville, enter a street address, an owner's name or a parcel number, and the matching parcel lights up. On ground around Alcoa, a pop-up or side panel normally shows the owner of record, assessed acreage, the parcel number and in many cases the last transfer.
Sections, lots and bearings
Tracts outside towns near Rockford commonly use metes-and-bounds descriptions, listing bearings, distances and landmarks. Platted lots around Alcoa refer to a recorded plat, which is simpler to follow. Keep the legal description for land near Friendsville for any title or survey request.
Recorded documents worth pulling
For anything that matters, request the recorded deed through the Register of Deeds; the parcel map near Friendsville only summarizes it. For a parcel near Maryville, have ready the document number shown in the record panel and the lookup takes minutes.
When there's no plat
Acreage around Maryville outside a subdivision may have no plat at all; the deed and any recorded survey describe it instead.
Louisville, TN: the basics
Louisville lies within Blount County, Tennessee, and the county assessor maps its lots. If the land is near Alcoa, city or town hall handles things like zoning, permits and utilities for lots inside the boundary, while the county keeps the tax map. Acreage past the town limits out by Alcoa usually answers to county rules, not municipal ones.
How a plat differs from the tax map
When the two disagree for a lot near Friendsville, go with the plat and a surveyor's work.
Places you'll see on the map
Maryville holds the county offices, which is where the courthouse records live. Other places on the map include Alcoa, Friendsville, and Rockford. Around 141,456 people call Blount County home (Census Bureau estimate, 2023) across some 559 square miles. Blount County was formed in 1795, and some chains of title near Rockford are long. Landmarks such as Fort Loudoun Lake are easy to spot when you zoom out from Vonore.
Offices that can help
Deeds, mortgages and recorded plats for land near Alcoa are with the Register of Deeds, sometimes only in person. Questions about what you can build around Friendsville need the planning or permitting office, and the answer depends on jurisdiction.
Details on the Louisville plat map
Utility or drainage strips on a lot in Louisville limit where you can build or fence; check the plat notes and any covenants.
Field tips
The parcel map usually runs in a mobile browser, handy when you're parked on a road near Friendsville, though signal can drop in rural spots. A printout of the tract near Townsend helps when you meet an owner or agent.
Amended plats
Lots near Townsend can be combined or reconfigured by a replat, so check for later filings; street vacations near Friendsville show up in the records too.
Online indexes and office visits
In and around Vonore, many recorder offices offer an online index, while others require a visit or a request; copy fees are usually small.
Neighboring parcel maps
With a lot near Maryville, Blount County meets Graham County, NC, Swain County, NC, Knox County, Loudon County, and Monroe County; every one of them runs a separate parcel map. A tract near the line by Maryville can show up in two county records, so open the adjacent map before you assume the acreage. If the land is near Alcoa, our state page lists every bordering county map for Tennessee.
Before you lean on the lines
Acreage on the record is an estimate; only a licensed surveyor establishes the real boundary on land around Alcoa. For a tract near Vonore, records update in batches, so a deed recorded last month can take weeks to appear.
Frequently asked
Can lots near Townsend be combined?
Combining or splitting lots near Townsend usually needs a recorded plat change.
What does lot 7, block 3 mean near Alcoa?
If you're looking near Friendsville, lot and block refer to a numbered lot within a block on a recorded subdivision plat, so pull that plat for dimensions.
What do the dashed lines on a plat mean near Townsend?
Around Friendsville, recorded plat easements usually show on the sheet, so check before you build.
How do I get a copy of a plat in Louisville?
For a parcel near Vonore, the Register of Deeds keeps recorded plats; small copy fees are common.
Is there an app for the parcel map near Friendsville?
For a home near Rockford, most viewers run in a mobile browser; screenshots help offline.
Open the official Blount County, TN parcel map See it in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey, especially for fences, setbacks, or boundary disputes.