Blog · September 25, 2026 · Florida
Hernando County, Florida GIS Parcel Map Guide
Hernando County sits on Florida’s Nature Coast just north of Tampa, where fast-growing Spring Hill meets the rolling hills around Brooksville and the springs at Weeki Wachee. The county’s ArcGIS parcel map is free and easy to use for home and land research. Here is a practical guide.
Main page: Hernando County, FL GIS & Parcel Viewer (official map link, Hernando County facts and neighboring maps).
Platbookmapper is an Amazon Associate. If you buy through an Amazon link on this page, we earn a commission. The link is a product, not the county map.
About Hernando County
Hernando was established on February 27, 1843, and briefly carried the name Benton County in 1844 before returning to its original name. Brooksville is the county seat, while Spring Hill is the largest community. The 2020 census counted 194,515 residents, and the county is part of the Tampa metropolitan area.
Visitors know Weeki Wachee Springs State Park and its long-running mermaid shows. Along the Suncoast Parkway and I-75, growth has brought new subdivisions and distribution jobs, including a Walmart distribution center in Ridge Manor. East and north of Brooksville, larger tracts, horse farms and wooded parcels remain.
The county parcel map
Our directory links the General Map on ArcGIS Experience. It comes from Hernando County Central GIS, the countywide GIS program whose website is hosted by the Hernando County Property Appraiser, and the map is published under the Property Appraiser’s ArcGIS account. It includes a legend, a layer list, basemaps, a measure tool, printing and an attribute table. You can search by owner, parcel number, parcel key or address.
The map carries a disclaimer that right-of-way widths and acreage are subject to survey. Treat measurements as estimates.
The Property Appraiser, Randy Mazourek, also runs a property search with sales, values and TRIM notices. The two work well together: the GIS map for location and layers, the appraiser’s record for ownership and value.
Using the map step by step
- Open the Hernando County General Map.
- Search by address, owner or parcel number.
- Click the parcel for details, then open the layer list to add zoning, flood or other layers.
- Use the measure tool for rough frontage or area.
- Print a map of the view for your notes.
- Open the Property Appraiser record for ownership, sales and value history.
Tips from the Property Appraiser
The Property Appraiser’s GIS questions page, updated in October 2025, answers several common requests:
- Surveys. The office does not keep surveys, but on platted lots the subdivision name in the record links to the recorded plat.
- Dimensions. You can print a dimension map from the GIS tab of the property record.
- Zoning. A zoning layer is in the viewer, and the county Zoning Department (352-754-4050) can confirm it.
- Merges and splits. Merging costs $25 per parcel merged, and the parcels must touch, be deeded to exactly the same owners and have current certified taxes paid. The office can split a parcel, also for $25 per parcel, only when a historic line already exists (shown as a dashed line on the GIS Map tab of its property search) and taxes are paid. Without a historic line, a split goes through the county Planning Department.
For home buyers in Spring Hill and Brooksville
Spring Hill was laid out as a large planned community, so many lots follow recorded subdivision plats. Use the plat link to see your lot’s recorded dimensions and easements, then compare them with the aerial to check fences and sheds. Check the flood layer, especially near the coast and low-lying areas, and confirm with the FEMA map and an elevation certificate.
In Brooksville’s older neighborhoods, legal descriptions may be more complex. The parcel record and plat link are a good start before you order a survey.
For land shoppers and builders
Rural buyers looking at acreage near Ridge Manor, Istachatta or the hills north of Brooksville can use aerial imagery and the measure tool for a first look. The county also publishes a GeoHub with layers such as setbacks, maximum building height, flood zones, wetlands, conservation lands and future land use. Checking those before an offer can save a lot of trouble.
Builders should confirm zoning and setbacks with the county. If you plan to combine lots before building, the appraiser’s rules above apply. For small lots in older platted subdivisions, see our guide on checking access and landlocked parcels.
Springs, wetlands and conservation land
Much of Hernando’s character comes from water and protected land. The Weeki Wachee River flows west from the spring to the Gulf, the Chassahowitzka area covers wide coastal marshes, and tracts of the Withlacoochee State Forest lie east of Brooksville. For a buyer, that means a parcel that looks dry in a listing photo may include wetlands, sit next to conservation land or fall partly inside a flood zone. Turn on the wetlands, conservation and flood layers in the GeoHub before an offer. If a parcel borders state land, expect limits on clearing near the edge and confirm access from a public road. A quick call to the county’s planning staff can tell you whether a wetland line needs to be flagged by an environmental consultant before a site plan is approved.
Offices and records
The Property Appraiser has offices in Brooksville and Spring Hill, with a main phone of 352-754-4190. Deeds and plats are recorded with the Clerk of the Circuit Court. For boundary questions, hire a Florida licensed surveyor and mapper.
Nearby counties
Hernando borders Pasco to the south and Citrus to the north. See our Pasco County guide and Citrus County guide, or open Hernando on the Platbookmapper map and the Florida directory.
Frequently asked questions
Is the Hernando County GIS map free?
Yes. The General Map from Hernando County Central GIS is free to use.
Can I get a survey from the Hernando Property Appraiser?
No. The office does not keep surveys, but the subdivision link opens the recorded plat for platted lots.
Does the Hernando map show zoning?
Yes. There is a zoning layer; confirm with the Zoning Department.
How much does it cost to split or combine parcels in Hernando?
The Property Appraiser charges $25 per parcel merged. A split is also $25 per parcel, but only where a historic split line already exists; otherwise it goes through the county Planning Department.
Open the official Hernando County GIS viewer Hernando County in the Platbookmapper directory
Not a survey. County GIS and tax parcel maps are assessment and planning layers. They are not a substitute for a recorded plat, deed, or licensed survey — especially for fences, setbacks, or boundary disputes.